| 基于三坐标测量数据的凸轮实体重构及加工 |
| |
| 引用本文： | 王建勇,贺炜,李思益,吴春英,唐平. 基于三坐标测量数据的凸轮实体重构及加工[J]. 轻工机械, 2004, 0(4): 84-85 |
| |
| 作者姓名： | 王建勇 贺炜 李思益 吴春英 唐平 |
| |
| 作者单位： | 陕西科技大学机电工程学院,陕西,咸阳,712081;兰州理工大学机电工程学院,甘肃,兰州,730050;陕西科技大学机电工程学院,陕西,咸阳,712081 |
| |
| 摘 要： | 提出了一种简便实用的反求方法，对某平面凸轮实物进行了三维几何形面的反求，以便实现原形加工和缩小、放大设计。
|
| 关 键 词： | CMM 凸轮 反求技术 CAD/CAM UG |
| 文章编号： | 1005-2895(2004)04-0084-02 |
| 修稿时间： | 2004-06-28 |
Model Reconstruction and Machining of Cam on Three-dimensional Measured Data |
| |
| WANG Jian-yong. Model Reconstruction and Machining of Cam on Three-dimensional Measured Data[J]. Light Industry Machinery, 2004, 0(4): 84-85 |
| |
| Authors: | WANG Jian-yong |
| |
| Affiliation: | WANG Jian-yong~ |
| |
| Abstract: | A simple and useful reverse method were introduced in this paper. By this method, a planar cam model was reconstructed in three-dimensional geometry, in order to carry out the machining and design the original object in miniature or in enlargement. |
| |
| Keywords: | CMM cam reverse engineering technology CAD/CAM UG |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
