首页 | 本学科首页   官方微博 | 高级检索  
     

铬(Ⅵ)-溴酸钾-偶氮胂I催化光度法测定水中痕量铬(Ⅵ)
引用本文:童碧海,吴芳辉,张千峰. 铬(Ⅵ)-溴酸钾-偶氮胂I催化光度法测定水中痕量铬(Ⅵ)[J]. 安徽工业大学学报, 2009, 26(4): 394-397
作者姓名:童碧海  吴芳辉  张千峰
作者单位:安徽工业大学,分子工程与应用化学研究所,安徽,马鞍山,243002 
摘    要:基于在乙酸-乙酸钠缓冲介质中,铬(Ⅵ)对溴酸钾氧化偶氮胂I的催化作用,建立了测定水中微量铬的新方法,研究了影响催化褪色反应速度的最佳条件,方法的检出限4.8×10^-7g/L,线性范围为0.12—2.2μg/25mL铬(Ⅵ)。多数常见的离子均不干扰测定。用于水中微量铬的测定,快速、准确、简便。

关 键 词:催化光度法  溴酸钾  偶氮胂Ⅰ  铬(Ⅵ)

Catalytic Spectrophotometric Determination of Trace Cr (VI) Based on the Cr (Vl)-Potassium Bromate-arsenazo I System in Water Samples
TONG Bi-hai,WU Fang-hui,ZHANG Qian-feng. Catalytic Spectrophotometric Determination of Trace Cr (VI) Based on the Cr (Vl)-Potassium Bromate-arsenazo I System in Water Samples[J]. Journal of Anhui University of Technology, 2009, 26(4): 394-397
Authors:TONG Bi-hai  WU Fang-hui  ZHANG Qian-feng
Affiliation:(Institute of Molecular Engineering and Applied Chemistry, Anhui University of Technology, Ma'anshan 243002, China)
Abstract:A new kinetic spectrophotometric method for the determination of trace amounts of Cr (Ⅵ) is described, based on the catalytic effect of trace Cr (Ⅵ) on the oxidation of arsenazo I by potassium bromate in pH=5 Hac- NaAc buffer solution. The optimum conditions influencing the rate of reaction were obtained. The detection limit for Cr (Ⅵ) is 4.8×10^-7 g/L. The linear range of the determination is 0.12 - 2.2 μg/25ml for Cr (Ⅵ). Common foreign ions have no interference on the determination of Cr (Ⅵ). This method was rapid, accurate and convenient for the determination of trace Cr (Ⅵ) in water samples.
Keywords:catalytic spectrophotometry  potassium bromate  arsenazo I  chromium(Ⅵ)
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号