| 游离磨料线锯切割机改造与试验 |
| |
| 引用本文： | 李子法,王志,王金生.游离磨料线锯切割机改造与试验[J].机械工程师,2014(4):67-68. |
| |
| 作者姓名： | 李子法 王志 王金生 |
| |
| 作者单位： | 台州职业技术学院机电工程学院;新杰克缝纫机股份有限公司; |
| |
| 基金项目： | 浙江省公益性技术应用研究项目(2012C31011) |
| |
| 摘 要： | 游离磨料多线锯切割技术广泛应用于硅碇、水晶等材料的切片加工。为了方便研究游离磨料线锯的切割机理、切片工艺等,对电火花线切割设备进行改造,使其满足游离磨料线锯切割的要求。并采用准0.14 mm的钢丝线,对水晶材料（K9）进行切割实验,结果表明改造的切割设备满足切割实验需求,为后续的实验提供了基础保障。
|
| 关 键 词： | 线锯 切割 设备改造 |
Epuipment Modification and Cutting Test for the Free Abrasive Wire Saw |
| |
| LI Zifa;WANG Zhi;WANG Jinsheng.Epuipment Modification and Cutting Test for the Free Abrasive Wire Saw[J].Mechanical Engineer,2014(4):67-68. |
| |
| Authors: | LI Zifa;WANG Zhi;WANG Jinsheng |
| |
| Affiliation: | LI Zifa;WANG Zhi;WANG Jinsheng;Department of the Mechanical and Electrical Engineering,Taizhou Vocational and Technical College;New Jack Sawing Machine Co.,Ltd; |
| |
| Abstract: | At present, free abrasive multi-wire saw technology has been widely used in slicing silicon ingots, crystal and other materials. To study the sawing mechanism and slicing process, the EDM wire cutting equipment is modified to meet therequirements of free abrasive wire saw cutting. 准0.14 mm steel wire is used to cut the crystal material（K9）. The results show that the modified cutting equipment can meet the requirements of cutting experiments, and can provide a basic guarantee for the subsequent experiments. |
| |
| Keywords: | wire saw cutting equipment modification |
| 本文献已被 CNKI 维普 等数据库收录！ |
