| 壁厚变化率对小锥角聚能射流形成影响的数值模拟 |
| |
| 引用本文： | 刘向东,刘天生,王凤英. 壁厚变化率对小锥角聚能射流形成影响的数值模拟[J]. 弹箭与制导学报, 2010, 30(3) |
| |
| 作者姓名： | 刘向东 刘天生 王凤英 |
| |
| 作者单位： | 中北大学化工与环境学院,太原,030051 |
| |
| 摘 要： | 基于油气井射孔弹的设计原理,应用LS-DYNA 有限元程序,采用ALE 方法对某特定结构小锥角聚能装药在不同壁厚变化率的情况下射流形成过程及侵彻双层靶板进行了数值模拟,计算结果表明:采用顶部薄、锥底厚的药型罩,射流速度梯度高,可形成高速细长射流;射流侵彻双层靶板孔径小,剩余速度大;小锥角聚能射流侵彻强度高,药型罩壁厚变化率选0.9%为最佳.
|
| 关 键 词： | 壁厚变化率 小锥角聚能装药 射流形成 侵彻 数值模拟 |
Numerical Simulation of Influence of Varying Rate of Clad on Jet Formation of Shaped Charge with Small Cone Angle |
| |
| LIU Xiangdong,LIU Tiansheng,WANG Fengying. Numerical Simulation of Influence of Varying Rate of Clad on Jet Formation of Shaped Charge with Small Cone Angle[J]. Journal of Projectiles Rockets Missiles and Guidance, 2010, 30(3) |
| |
| Authors: | LIU Xiangdong LIU Tiansheng WANG Fengying |
| |
| Affiliation: | LIU Xiangdong,LIU Tiansheng,WANG Fengying(School of Chemical Engineering , Environment,North University of China,Taiyuan 030051,China) |
| |
| Abstract: | Based on design principle of oil well charge,the LS-DYNA3D finite element analysis software and the arbitrary Lagrange Eulerian(ALE) algorithms were used to simulate the formation process of shaped charge jet and penetration of double-layer target under different varying rate of clad.the results show that the liner of thin tip and thick bottom enhance the gradient of jet velocity,and has the ability to produce high velocity and long jet;The double-layer target penetrated by jet has a small hole.The jet rema... |
| |
| Keywords: | varying rate of clad shaped charge with small cone angle jet formation penetration numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
