| 剪板机回程带料问题分析及设计要点 |
| |
| 引用本文： | 王成国,刘进,刘伟.剪板机回程带料问题分析及设计要点[J].锻压装备与制造技术,2012(1):25-27. |
| |
| 作者姓名： | 王成国 刘进 刘伟 |
| |
| 作者单位： | 江苏亚威机床股份有限公司,江苏江都,225200 |
| |
| 摘 要： | 剪板机的刀架在剪切完板料后回程,有时会出现上刀片的上边带住板料向上移动的现象,针对这一问题,笔者经过试验和研究分析,找到了剪板机回程带料的原因,并提出了在剪板机设计时的几个注意点,供大家学习和参考。
|
| 关 键 词： | 机械制造 带料故障 剪板机 改进 |
Problem analysis and key design of touching sheet by cutter holder in return process of shearing machine |
| |
| WANG Chengguo
,
LIU Jin
,
LIU Wei.Problem analysis and key design of touching sheet by cutter holder in return process of shearing machine[J].China Metalforming Equipment & Manufacturing Technology,2012(1):25-27. |
| |
| Authors: | WANG Chengguo LIU Jin LIU Wei |
| |
| Affiliation: | (Jiangsu Yawei Machine-Tool Co.,Ltd.,Jiangdu 225200,Jiangsu China) |
| |
| Abstract: | Sometimes the upper edge of the upper blade moves upward with the sheet metal in returning process of cutting holder after cutting off the sheet metal.Aiming at the above problem,by use of test and study analysis,the reason of touching sheet by cutting holder in return process of shear has been found out.Moreover,some notes in designing the shear for study and reference have been pointed out in the text. |
| |
| Keywords: | Touching sheet error Shear Improvement |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
