| 湿式制动器引起的齿轮噪声处理 |
| |
| 引用本文： | 秦剑,冯华伟,吴强. 湿式制动器引起的齿轮噪声处理[J]. 锻压装备与制造技术, 2012, 0(1): 39-41 |
| |
| 作者姓名： | 秦剑 冯华伟 吴强 |
| |
| 作者单位： | 徐州锻压机床厂集团公司,江苏徐州,221116 |
| |
| 摘 要： | 试车中的一台闭式单点2500kN压力机,在制动刹车时出现齿轮噪声超标现象,通过先后排除各种因素后,确定湿式离合器/制动器内腔中润滑油量过少是主要原因。增补润滑油后,问题顺利解决。由此可以得出,为降低刹车齿轮噪声,可通过选择"静态和动态摩擦系数比"接近1的摩擦材料,不失一种好的方法。
|
| 关 键 词： | 机械制造 噪声故障 湿式离合器/制动器 机械压力机 |
Solution of gear noise caused by wet breaker |
| |
| QIN Jian , FENG Huawei , WU Qiang. Solution of gear noise caused by wet breaker[J]. China Metalforming Equipment & Manufacturing Technology, 2012, 0(1): 39-41 |
| |
| Authors: | QIN Jian FENG Huawei WU Qiang |
| |
| Affiliation: | (Xuzhou Metalforming Machine Group Co.,Ltd.,Xuzhou 221116,Jiangsu China) |
| |
| Abstract: | Gear noise caused by brake is bigger than design standards during the test of a 250t straight side single point press.The main reason is that the lubricating oil amount filled in the inner cavity of wet clutch/break is too less.The problem has been solved by adding oil.It is found out that the material of which "coefficient ratio of static and dynamic friction" is approximate 1 can reduce the gear noise. |
| |
| Keywords: | Noise fault Wet clutch/break Mechanical press |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
