| 利用Moldflow软件优化畚斗的冷却系统 |
| |
| 引用本文： | 赵妙君,王镇江. 利用Moldflow软件优化畚斗的冷却系统[J]. 广西工学院学报, 2012, 23(2): 46-50 |
| |
| 作者姓名： | 赵妙君 王镇江 |
| |
| 作者单位： | 广西工学院汽车与交通学院,广西柳州,545006 |
| |
| 基金项目： | 广西教育厅科研项目，柳州市科技攻关项目 |
| |
| 摘 要： | 利用Moldflow软件对畚斗的冷却过程进行模拟,根据制品原始方案的冷却分析结果,通过调整冷却水路布置、改变冷却液的温度、更改制品型芯材料,对冷却系统进行优化,得到了优化的冷却系统,从而使制品达到均匀冷却,减少翘曲变形.通过进一步调整充填+保压+冷却时间,优化了冷却时间,缩短了成型周期,提高了制品质量.制品达到了均匀冷却,减少冷却时间的目的.
|
| 关 键 词： | Moldflow 冷却系统 均匀冷却 翘曲变形 |
Application of Moldflow software in optimizing the cooling system of dustpan |
| |
| ZHAO Miao-jun,WANG Zhen-jiang. Application of Moldflow software in optimizing the cooling system of dustpan[J]. Journal of Guangxi University of Technology, 2012, 23(2): 46-50 |
| |
| Authors: | ZHAO Miao-jun WANG Zhen-jiang |
| |
| Affiliation: | (College of Automobile and Transportation, Guangxi University of Technology, Liuzhou 545006, China) |
| |
| Abstract: | The cooling process of the dustpan was simulated and analyzed by using Moldflow software. Based on the analysis of the original cooling method, by optimizing arrangement of the cooling channel, changing temperature of the cooling liquid, modifying core material of the product, the cooling system was optimized and obtained. It achieved the balanced cooling and reduced the warping deformation of the product. And then, filling, packing and cooling time was further adjusted, it optimized the cooling time, shortened the molding cycle and improved the quality of product. Finally, it achieved the balanced cooling and reduced the warping deformation of the product. |
| |
| Keywords: | Moldflow cooling system balanced cooling warping deformation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
