| 板坯结晶器内钢/渣界面流态的水模拟 |
| |
| 引用本文： | 舒志浩,侯泽旺. 板坯结晶器内钢/渣界面流态的水模拟[J]. 钢铁钒钛, 2012, 33(3): 40-45 |
| |
| 作者姓名： | 舒志浩 侯泽旺 |
| |
| 作者单位： | 先进钢铁流程及材料国家重点实验室,钢铁研究总院连铸技术国家工程研究中心,北京100081 |
| |
| 摘 要： | 通过在全比例水模型上进行模拟,研究了结晶器宽度、拉坯速度、浸入式水口结构及水口浸入深度等工艺参数对板坯结晶器内钢/渣界面波动和界面最大流速的影响。结果表明:单独增大结晶器宽度或拉坯速度,结晶器内钢/渣界面波动和界面最大流速都将增大;而浸入式水口结构和水口浸入深度对钢/渣界面波动和界面最大流速的影响较复杂,其中,15°凸型水口通用性较好。
|
| 关 键 词： | 板坯连铸 结晶器 钢/渣界面 界面波动 界面最大流速 |
Water Simulation of Steel/Slag Interface Flow Regime of the Slab Mould |
| |
| Shu Zhihao , Hou Zewang. Water Simulation of Steel/Slag Interface Flow Regime of the Slab Mould[J]. Iron Steel Vanadium Titanium, 2012, 33(3): 40-45 |
| |
| Authors: | Shu Zhihao Hou Zewang |
| |
| Affiliation: | (State Key Laboratory of Advanced Steel Processing and Products,National Engineering Research Center of Continuous Casting Technology,Central Iron and Steel Research Institute,Beijing 100081,China) |
| |
| Abstract: | Based on a full-size water mould,the influences of the process parameters on the flow regime of steel/slag interface of the slab mould,such as the mould width,casting speed,SEN structure、submergence depth of SEN,etc were investigated.The results show that interfacial fluctuations and the max fluid rates at slag/steel interface increases with the augment of the mould width or casting speed,while the influence of SEN structure and submergence depth of SEN on interfacial fluctuations and the max fluid rates at slag/steel interface is complicated.It is concluded that the convex type SEN with an outlet angle of 15° has better universality. |
| |
| Keywords: | slab continuous casting mould steel/slag interface interfacial fluctuations the max fluid rates at slag/steel interface |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
