| 噻唑啉基二硫代丙烷磺酸钠对印花镍网开孔率的影响 |
| |
| 引用本文： | 许志刚,王世颖,王文昌,陈智栋.噻唑啉基二硫代丙烷磺酸钠对印花镍网开孔率的影响[J].电镀与精饰,2018(5):11-14. |
| |
| 作者姓名： | 许志刚 王世颖 王文昌 陈智栋 |
| |
| 作者单位： | 常州大学材料科学与工程学院,江苏常州,213164
常州大学石油化工学院,江苏常州,213164 |
| |
| 基金项目： | 中国国家自然基金(51574047和51601020)，中国江苏省高等教育机构自然科学基金会(16KJA430004) |
| |
| 摘 要： | 本文采用噻唑啉基二硫代丙烷磺酸钠(SH110)作为镍电铸添加剂,进行了电铸镍网实验。以镍网开孔率为评价指标,通过考察SH110添加量对镍网开孔率的影响,以获得提高镍网开孔率最优的电铸液配方。结果表明,SH110在电铸液扩散速度较高时,对镍的电沉积有促进作用,反之在扩散速度较低时,对镍的电沉积有抑制作用,在SH110浓度为3 mg/L时,镍网的开孔率最大,达到17.75%。
|
| 关 键 词： | 印花镍网 电铸 噻唑啉基二硫代丙烷磺酸钠 开孔率 nickel printing mesh electroforming sodium thiazolinyl-dithiopropane sulfonate (SH110) open porosity |
Influences of Sodium Thiazolinyl-Dithiopropane Sulfonate on the Open Porosity of Nickel Printing Mesh |
| |
| XU Zhigang,WANG Shiying,WANG Wenchang,CHEN Zhidong.Influences of Sodium Thiazolinyl-Dithiopropane Sulfonate on the Open Porosity of Nickel Printing Mesh[J].Plating & Finishing,2018(5):11-14. |
| |
| Authors: | XU Zhigang WANG Shiying WANG Wenchang CHEN Zhidong |
| |
| Abstract: | Electroforming of nickel mesh was carried out using sodium thiazolinyl-dithiopropane sulfonate (SH110) as electroforming additive.Optimum formula of electroforming solution for improving the nickel mesh open porosity was obtained by using open porosity as evaluation index and investigating the influence of SH110 addition amount on open porosity of the nickel mesh.Results showed that SH 110 had a promoting effect on the nickel electrodeposition when diffusion rate of the electrofoming solution was high,whereas had an inhibiting effect when the diffusion rate was low.When the SH110 concentration was 3 mg· L-1,the open porosity of nickel mesh was the largest which could reach to 17.75％. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
