首页 | 本学科首页   官方微博 | 高级检索  
     

聚四氟乙烯/碳纤维增强聚酰亚胺复合体系的摩擦学性能
引用本文:贾均红,高生强,陈建敏,周惠娣,杨华勇. 聚四氟乙烯/碳纤维增强聚酰亚胺复合体系的摩擦学性能[J]. 材料科学与工程学报, 2003, 21(2): 183-186
作者姓名:贾均红  高生强  陈建敏  周惠娣  杨华勇
作者单位:1. 中国科学院兰州化学物理研究所固体润滑国家重点实验室,甘肃,兰州,730000
2. 中国科学院化学研究所工程塑料国家重点实验室,北京,100080
3. 浙江大学流体传动及控制国家重点实验室,浙江,杭州,3100027
基金项目:国家自然科学基金,国家重点实验室基金,中国科学院知识创新工程项目,59925513,9005,,,,
摘    要:研究评价了不同PTFE含量的碳纤维增强P1复合材料的力学和摩擦学性能,并分析了在干摩擦和水润滑2种不同条件下的磨损表面形貌和磨损机理。研究表明:PTFE以10%添加时PI/CF/PTFE体系的机械性能最佳,而摩擦学性能以5%添加为佳;随PTFE含量的增加,复合材料的摩擦系数降低,磨损率增加。水润滑下,摩擦系数和磨损率比干摩擦下的都有相应的降低。干摩擦下,材料的磨损均以塑性变形、微观破裂及破碎为主导;水润滑下,这一机制显著减弱,归因于水的润滑和冷却作用。

关 键 词:碳纤维增强聚酰亚胺 聚四氟乙烯 复合材料 摩擦学性能 力学性能 摩擦磨损
文章编号:1004-793X(2003)02-0183-04
修稿时间:2002-08-10

Tribological Properties and Wear Mechanism of PTFE and Carbon Fiber Reinforced PI Composites
JIA Jun-hong+,GAO Sheng-qiang+,CHEN Jian-min+,ZHOU Hui-di+,YANG Hua-yong+. Tribological Properties and Wear Mechanism of PTFE and Carbon Fiber Reinforced PI Composites[J]. Journal of Materials Science and Engineering, 2003, 21(2): 183-186
Authors:JIA Jun-hong+  GAO Sheng-qiang+  CHEN Jian-min+  ZHOU Hui-di+  YANG Hua-yong+
Affiliation:JIA Jun-hong+1,GAO Sheng-qiang+2,CHEN Jian-min+1,ZHOU Hui-di+1,YANG Hua-yong+3
Abstract:The mechanical properties and fricition and wear behavior of carbon firber reinforced PI composites with different PTFE containing was comparatively evaluated under dry sliding and water-lubricated condition. The wear mechanisms of the composites under the two different sliding conditions were also comparatively discussed, based on scanning electron microscopic examination of the worn composite. As the results, the inclusion of PTFE in PI contributed to decrease the friction coefficients considerably. However, the wear rate of the composites increases gradually with increasing PTFE content under both dry-and water-lubricated sliding. PI composite with 10% PTFE content has the best mechanical properties. All the composites are characterized by plastic deformation, micro cracking, and spalling under both dry-and water-lubricated conditions. Such plastic deformation, micro cracking, and spalling, however, is significamtly abated under water-lubricated condition. There attributed to the lubricity and cooling effect of water.
Keywords:polymide  carbon fiber  polyterafluoroethylene  tribological properties
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号