Thermal properties of extruded/injection‐molded poly(lactic acid) and biobased composites |
| |
Authors: | Abdellatif A. Mohamed V. L. Finkenstadt D. E. Palmquist |
| |
Affiliation: | 1. Cereal Products & Food Science Unit, National Center for Agriculture Utilization Research, U.S. Department of Agriculture Agricultural Research Service, 1815 North University Drive, Peoria, Illinois 61604;2. Plant Polymer Research Unit, National Center for Agriculture Utilization Research, U.S. Department of Agriculture Agricultural Research Service, 1815 North University Drive, Peoria, Illinois 61604;3. Area Statistician;4. National Center for Agriculture Utilization Research, U.S. Department of Agriculture Agricultural Research Service, 1815 North University Drive, Peoria, Illinois 61604 |
| |
Abstract: | To determine the degree of compatibility between poly(lactic acid) and different biomaterials (fibers), poly(lactic acid) was compounded with sugar beet pulp and apple fibers. The fibers were added in 85 : 15 and 70 : 30 poly(lactic acid)/fiber ratios. The composites were blended by extrusion followed by injection molding. Differential scanning calorimetry and thermogravimetric analysis were used to analyze the extruded and extruded/injection‐molded composites. After melting in sealed differential scanning calorimetry pans, the composites were cooled through immersion in liquid nitrogen and aged (stored) at room temperature for 0, 7, 15, and 30 days. After storage, the samples were heated from 25 to 180°C at 10°C/min. The neat poly(lactic acid) showed a glass‐transition transition at 59°C with a change in heat capacity (ΔCp) value of 0.464. The glass transition was followed by crystallization and melting transitions. The enthalpic relaxation of the poly(lactic acid) and composites steadily increased as a function of the storage time. Although the presence of fibers had little effect on the enthalpic relaxation, injection molding reduced the enthalpic relaxation. The crystallinity percentage of the unprocessed neat poly(lactic acid) dropped by 95% after extrusion and by 80% for the extruded/injection‐molded composites. The degradation was performed in air and nitrogen environments. The degradation activation energy of neat poly(lactic acid) exhibited a significant drop in the nitrogen environment, although it increased in air. This meant that the poly(lactic acid) was more resistant to degradation in the presence of oxygen. Overall, injection molding appeared to reduce the activation energy for all the composites. Sugar beet pulp significantly reduced the activation energy in a nitrogen environment. In an air environment, both sugar beet pulp and apple fibers increased the activation energy. The enzymatic degradation of the composites showed a higher degradation rate for the extruded samples versus the extruded/injection‐molded composites, whereas the apple composites exhibited higher weight loss. The thermogravimetric analysis data showed that the degradation of unprocessed and extruded neat poly(lactic acid) followed a one‐step mechanism, whereas extruded/injection‐molded composites showed two‐step degradation. A higher fiber content resulted in up to three‐step degradation mechanisms. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008 |
| |
Keywords: | ageing biodegradable differential scanning calorimetry (DSC) thermal properties thermogravimetric analysis (TGA) |
|
|