Application of instrumented impact testing for studying dynamic fracture behaviour of rotor steels

The viability of the instrumented Charpy impact testing for studying dynamic fracture behaviour of rotor steels is investigated. This encompasses determination of dynamic fracture toughness (K_Id) and dynamic J-integral (J_Id), establishing correlation between oscilloscope profiles and fracture morphology of the ruptured samples and identifying fracture mechanisms involved. The predicted oscilloscope profiles for common fracture modes, their experimental counterparts, and the inferences drawn from these concerning operating fracture mechanisms are in good accord with the fractographic observations made on broken samples. Thus, the respective oscillographs vividly manifest the observed variations in the fracture processes. Fracture mechanics analysis of load-time and energy-time records of pre-cracked Charpy samples gave dynamic fracture toughness (K_Id) values of 43, 74 and 124MN/m3/2, and dynamic J-integral (J_Id) values of 0.008, 0.03 and 0.06 MJ/m² at ?180°, 26° and 96°C respectively. It is possible that the deduced J_Id values correspond to a small but finite amount of crack extension instead of Zero Crack extension, in line with the emerging trends of J_Id estimation. Apart from increasing with temperature, both parameters recorded a true transition around 35°C which is attributed to the combined influence of a change in the fracture mode and relaxation of crack tip constraint. Another significant outcome of this investigation concerns about the existence of a minimum crack depth ratio for valid J_Id determination which, based on a detailed fractographic study, is interpreted in terms of the collective influence of crack tip plasticity and notch constraint.