| 钢丝表面除锈设备的参数设计 |
| |
| 引用本文： | 王华,周诚祥. 钢丝表面除锈设备的参数设计[J]. 金属制品, 2005, 31(2): 18-19 |
| |
| 作者姓名： | 王华 周诚祥 |
| |
| 作者单位： | 新华金属制品股份有限公司,新余,338004;新华金属制品股份有限公司,新余,338004 |
| |
| 摘 要： | 介绍两辊式和三辊式机械弯曲除锈原理,给出关键参数如辊子直径、牵引力等的设计计算方法。辊子直径要保证低碳钢丝延伸率为6%～8%,高碳钢的延伸率为3%～5%。在除锈机后安装精除锈装置,去除氧化皮效果更好。
|
| 关 键 词： | 机械除锈 弯曲辊 牵引力 参数设计 |
| 修稿时间： | 2004-11-26 |
Parameter Design of Equipment Eliminating Rust on Steel Wire Surface |
| |
| Wang Hua,Zhou Chengxiang. Parameter Design of Equipment Eliminating Rust on Steel Wire Surface[J]. Steel Wire Products, 2005, 31(2): 18-19 |
| |
| Authors: | Wang Hua Zhou Chengxiang |
| |
| Abstract: | To introduce the principle of two rollers and three rollers mechanically eliminating rust. Design and calculation method of the key parameter such as the diameter of roller and pulling force are given. The diameter of roller ensures that specific elongation of low carbon steel wire is from 6 percent to 8 percent and that of high carbon steel wire is from 3 percent to 5 percent. The effect of scale removal is better when fine eliminating rust equipment is set after mechanically eliminating rust parts. |
| |
| Keywords: | mechanically eliminating rust bend roller pulling force parameter design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
