首页 | 本学科首页   官方微博 | 高级检索  
     

基于MASTA的齿轮微观修形研究
引用本文:杨素芬,贺敬良,董和媛.基于MASTA的齿轮微观修形研究[J].北京机械工业学院学报,2012,27(4):89-92.
作者姓名:杨素芬  贺敬良  董和媛
作者单位:1. 北京信息科技大学机电工程学院,北京,100192
2. 装甲兵工程学院机械工程系,北京,100072
基金项目:北京市优秀人才培养项目(2010C005007000001)
摘    要:根据齿轮啮合原理,基于MASTA建立了齿轮传动系统模型。在对齿轮进行模拟装配后,利用MASTA的微观修形模块对齿轮进行了修形分析,得到了齿轮修形前后的传递误差图、振幅以及接触斑点分布图。将修形前后的各图进行对比后发现,齿面接触面积和接触偏载情况均得到明显改善,传递误差明显减小,验证了基于MASTA对齿轮进行微观修形的有效性。表明通过MASTA,可对齿轮齿面微观修形参数进行合理设计和优化,可有效改善齿轮传动时的齿面偏载,减小齿面接触应力,提高齿轮副的传动质量和承载能力。

关 键 词:齿轮修形  接触斑点  传递误差  MASTA

The study on gear micro modification based on MASTA
YANG Su-fen , HE Jing-liang , DONG He-yuan.The study on gear micro modification based on MASTA[J].Journal of Beijing Institute of Machinery,2012,27(4):89-92.
Authors:YANG Su-fen  HE Jing-liang  DONG He-yuan
Affiliation:1. School of Electromechanical Engineering, Beijing Information Science and Technology University, Beijing 100192, China; 2. School of Mechanical Engineering, Armored Force Engineering College, Beijing 100072, China)
Abstract:According to the principle of gear engagement, the solid model of gear system is built based on MASTA. After the simulation assembly of gear, the analysis of gear modification is done by using the gear micro geometry module of the MASTA software. The transmission error chart, amplitude and the contact spot distribution maps are obtained through the comparison between before and after the modification. The results show that the gear surface's contact area and the partial load conditions improve obviously, and the transmission error is reduced significantly, thus, the effectiveness of gear micro modification is verified. It is indicated that using MASTA for the reasonable design and optimization of gear micro geometry can improve the tooth surface slanting load, reduce the contact stress and increase the transmission quality and bearing capacity of gear pair.
Keywords:gear modification  contact spot  transmission error  MASTA
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号