首页 | 本学科首页   官方微博 | 高级检索  
     

嵌入式Linux下Qt/Embedded的应用
引用本文:王存健,张建正.嵌入式Linux下Qt/Embedded的应用[J].微机发展,2006,16(11):179-181.
作者姓名:王存健  张建正
作者单位:华东理工大学信息科学与工程学院 上海200237
摘    要:随着嵌入式系统的发展,用于实现与用户交流功能的嵌入式GUI成为研究中的一个重点。嵌入式Linux下,如果图形界面接口采用的是Qt/Embedded,则必须采用Linux的帧缓冲设备来处理相关的底层命令。帧缓冲是Linux为图形设备提供的一个抽象接口,是Qt/Embedded的底层图形引擎。文中介绍了Linux帧缓冲设备驱动程序框架,基于三星公司的S3C2410x处理器的开发平台,系统给出了嵌入式图形界面GUI的移植,包括编译环境的建立,编译参数的设置等。

关 键 词:嵌入式Linux  Qt/Embedded  帧缓冲
文章编号:1673-629X(2006)11-0179-03
修稿时间:2006年3月7日

Application of Qt/Embedded on Embedded Linux
WANG Cun-jian,ZHANG Jian-zheng.Application of Qt/Embedded on Embedded Linux[J].Microcomputer Development,2006,16(11):179-181.
Authors:WANG Cun-jian  ZHANG Jian-zheng
Abstract:With the development of embedded system,embedded GUI which is used to communicate with users has become a key in researching the embedded system.If GUI such as Qt/Embedded is used,the Linux framebuffer device must be implemented to process low level commands.The framebuffer device provides an abstract interface for the graphics hardware,which is the foundation of Qt/Embedded graphics engine of low level.Introduces the framework of the Linux framebuffer device drivers and the transplantation of embedded GUI under the platform of Samsung's S3C2410x processor,including the establishing of compiling environment,configuring and modifying of compiling parameters.
Keywords:embedded Linux  Qt/embedded  framebuffer
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号