Lead(II)‐ion removal by ethylenediaminetetraacetic acid ligand functionalized magnetic chitosan–aluminum oxide–iron oxide nanoadsorbents and microadsorbents: Equilibrium,kinetics, and thermodynamics

Novel nanosized and microsized chitosan–Al₂O₃–Fe₃O₄ (CANF and CAMF, respectively) adsorbents were functionalized with ethylenediaminetetraacetic acid (EDTA) ligands and applied to the removal of Pb(II) ions. The prepared adsorbents were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis, and their adsorption potentials were investigated with Pb(II) as a target metal under various experimental conditions. Our results show that the EDTA functionalization of CANF and CAMF increased their adsorption capacities about 31.5 and 38 times, respectively. The optimum dosage obtained was 1.0 g/L for both EDTA‐functionalized adsorbents, and the maximum adsorption took place at pH = 5.3. The kinetic results revealed that the adsorption obeyed the pseudo‐second‐order model and that the pore diffusion process played a key role in the adsorption kinetics. Also, the results of equilibrium isotherms indicate the good fit of the experimental data by the Langmuir isotherm model under the studied concentration and temperature ranges, and the adsorptions of Pb(II) ions from aqueous solution followed the monolayer coverage of the adsorbents. The maximum Pb(II)‐ion adsorption capacities of EDTA–CANF and EDTA–CAMF were 160 and 157 mg/g, respectively. These metal‐loaded adsorbents could be readily recovered from aqueous solution by magnetic separation and reused. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44360.