首页 | 本学科首页   官方微博 | 高级检索  
     

电脉冲孕育处理对Al-5Cu合金热裂的影响
引用本文:王冰,王建中,齐锦刚,曹力生,苍大强.电脉冲孕育处理对Al-5Cu合金热裂的影响[J].特种铸造及有色合金,2007,27(6):420-422.
作者姓名:王冰  王建中  齐锦刚  曹力生  苍大强
作者单位:1. 北京科技大学冶金与生态工程学院;辽宁工学院材料与化学工程学院
2. 辽宁工学院材料与化学工程学院
3. 锦州师范专科学校
4. 北京科技大学冶金与生态工程学院
摘    要:研究了不同电脉冲孕育处理参数对Al-5Cu合金热裂倾向的影响.结果表明,不同电脉冲孕育处理参数均可降低Al-5Cu合金的热裂倾向,处理后该合金热裂临界应力比未处理试样提高了约3倍.合金热裂倾向改善的原因是,电脉冲孕育处理细化了Al-5Cu合金组织,减少了共晶相的数量,缩短了合金凝固温度区间.

关 键 词:热裂  Al-Cu合金  电脉冲孕育处理  细化
文章编号:1001-2249(2007)06-0420-03
修稿时间:2006-12-24

Effects of Electric Pulse Modification on the Hot Cracking Tendency of Al-5Cu Alloy
Wang Bing,Wang Jianzhong,Qi Jin'gang,Cao Lisheng,Cang Daqiang.Effects of Electric Pulse Modification on the Hot Cracking Tendency of Al-5Cu Alloy[J].Special Casting & Nonferrous Alloys,2007,27(6):420-422.
Authors:Wang Bing  Wang Jianzhong  Qi Jin'gang  Cao Lisheng  Cang Daqiang
Abstract:The effects of electric pulse modification(EPM) on the hot cracking tendency of Al-5Cu alloy have been investigated.The results indicate that the hot cracking tendency can be effectively restrained after treated by electric pulse modification with different parameters.Moreover,the hot cracking critical stress of alloy treated by EPM is increased by 3 times or so than that of the samples without treatment,which is attributed to the grain refinement of Al-Cu alloy and the decrease of eutectic phase in boundary as well as narrow of solidified temperature zone with EPM treatment.
Keywords:Hot Crack  Al-Cu Alloy  EPM  Refinement
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号