| 预氧化温度对聚丙烯腈纳米纤维结构和性能的影响 |
| |
| 引用本文： | 赵从涛,覃小红,王善元. 预氧化温度对聚丙烯腈纳米纤维结构和性能的影响[J]. 合成纤维, 2007, 36(12): 16-19,24 |
| |
| 作者姓名： | 赵从涛 覃小红 王善元 |
| |
| 作者单位： | 东华大学纺织学院,上海,201620;东华大学纺织学院,上海,201620;东华大学纺织学院,上海,201620 |
| |
| 基金项目： | 国家自然科学基金资助项目(10602014) |
| |
| 摘 要： | 通过静电纺丝法制得聚丙烯腈纳米纤维毡,再经过不同的预氧化温度得到预氧化程度不同的纳米预氧化毡。分析了在预氧化毡制备过程中预氧化温度对预氧化毡的结构和性能的影响。研究结果表明:随着温度的升高,拉伸性能和含水率逐渐增强,质量损失率在220～250℃之间快速提高。另外,环化度在220～250℃之间增加得特别快,环化反应主要发生在220℃左右,250℃环化反应基本完全;265℃得到预氧化程度较佳的预氧化毡。
|
| 关 键 词： | 聚丙烯腈 静电纺丝 预氧化 环化度 |
| 文章编号： | 1001-7054（2007）12-0016-04 |
| 收稿时间： | 2007-06-02 |
| 修稿时间： | 2007-07-05 |
Effect of the Pre-oxidation Temperature on the Structure and Property of Electrospinning Polyacrylonitrile Nanofibers |
| |
| ZHAO Cong-tao,QIN Xiao-hong,Wang Shan-yuan. Effect of the Pre-oxidation Temperature on the Structure and Property of Electrospinning Polyacrylonitrile Nanofibers[J]. Synthetic Fiber in China, 2007, 36(12): 16-19,24 |
| |
| Authors: | ZHAO Cong-tao QIN Xiao-hong Wang Shan-yuan |
| |
| Abstract: | PAN nanofibers webs made by electrospinning were pre-oxidated at different temperatures. Effects of the temperature on the structure and property of pre-oxidation webs were discussed. The results showed that with the increasing temperature, the tensile properties and moisture content gradually increased. Mass loss rate was also found to quickly increase in the range 220~250 ℃. In addition, the cyclization index rapid rise in the range 220~235 ℃. The cyclization reaction was drastic at about 220 ℃ and basically finished at above 250 ℃. When the pre-oxidation temperature was at 265 ℃, pre-oxidation webs had a better pre-oxidation degree. |
| |
| Keywords: | polyacrylonitrile electrospinning pre-oxidation cyclization index |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《合成纤维》浏览原始摘要信息 |
|
点击此处可从《合成纤维》下载全文 |
|
