| 基于改进响应面法的电缆-碳纤维增强复合材料集成构件电缆埋置位置优化 |
| |
| 引用本文： | 杨旭,周德俭,庄功伟,宋微,刘潇龙,佘雨来. 基于改进响应面法的电缆-碳纤维增强复合材料集成构件电缆埋置位置优化[J]. 中国机械工程, 2021, 32(16): 2008-2015. DOI: 10.3969/j.issn.1004-132X.2021.16.014 |
| |
| 作者姓名： | 杨旭 周德俭 庄功伟 宋微 刘潇龙 佘雨来 |
| |
| 作者单位： | 1.西安电子科技大学机电工程学院，西安，7100712.桂林电子科技大学机电工程学院，桂林，5410043.中国电子科技集团公司第十研究所，成都，610036 |
| |
| 基金项目： | 广西自然科学基金（2017GXNSFBA198180）；广西制造系统与先进制造技术重点实验室课题（1725905004Z） |
| |
| 摘 要： | 针对电缆碳纤维增强复合材料(CFRP)集成构件中电缆埋置位置参数难以确定的问题,建立了集成构件的有限元分析模型和电磁兼容分析模型,提出了一种采用改进响应面法来求解电缆埋置位置参数优化问题的方法.利用该方法,综合考虑电缆的力学性能、电磁兼容性能和制造约束条件,预测得到了一组高质量的电缆埋置位置参数.验证结果表明,使用这组...
|
| 关 键 词： | 集成构件 有限元分析 力学性能 电磁兼容性能 改进响应面法 |
Embedded Position Optimization of Cables in Cables-Carbon Fiber Reinforced Composite Integrated Components Based on Improved Response Surface Methodology |
| |
| YANG Xu,ZHOU Dejian,ZHUANG Gongwei,SONG Wei,LIU Xiaolong,SHE Yulai. Embedded Position Optimization of Cables in Cables-Carbon Fiber Reinforced Composite Integrated Components Based on Improved Response Surface Methodology[J]. China Mechanical Engineering, 2021, 32(16): 2008-2015. DOI: 10.3969/j.issn.1004-132X.2021.16.014 |
| |
| Authors: | YANG Xu ZHOU Dejian ZHUANG Gongwei SONG Wei LIU Xiaolong SHE Yulai |
| |
| Affiliation: | 1.School of Mechano-Electronic Engineering,Xidian University,Xi'an,7100712.School of Mechano-Electronic Engineering,Guilin University of Electronic Technology,Guilin,Guangxi，5410043.The 10th Research Institute of China Electronics Technology Group Corporation，Chengdu，610036 |
| |
| Abstract: | Aiming at the problems that were difficult to determine the cable location parameters of cables-carbon fiber reinforced composite(CFRP) integrated components, the finite element analysis model and electromagnetic compatibility analysis model of the integrated components were established. An improved response surface method was proposed and used to solve the optimization problems of cables embedding location parameters. Finally, a set of high-quality cables embedding location parameters were predicted by considering the mechanics properties, EMC performances and manufacturing constraints. The verification results show that the integrated components obtained by using these parameters may meet all the constraints, the average error between the predicted and actual values of all responses is as 3%, and the embedded cables has little effect on the mechanics properties of CFRP matrix. |
| |
| Keywords: | integrated component finite element analysis mechanics property electromagnetic compatibility(EMC) performance improved response surface method |
|
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载免费的PDF全文 |
