首页 | 本学科首页   官方微博 | 高级检索  
     

铜基大块非晶合金的临界冷速与组织形貌变化
引用本文:杨英俊,邢大伟,孙剑飞,魏思东,沈军.铜基大块非晶合金的临界冷速与组织形貌变化[J].稀有金属材料与工程,2007,36(2):236-240.
作者姓名:杨英俊  邢大伟  孙剑飞  魏思东  沈军
作者单位:1. 哈尔滨工业大学,黑龙江,哈尔滨,150001;空军航空大学,吉林,长春,130022
2. 哈尔滨工业大学,黑龙江,哈尔滨,150001
3. 空军航空大学,吉林,长春,130022
摘    要:制备了具有良好玻璃形成能力的Cu52.5Ti30Zr11.5Ni6大块非晶合金,其临界直径达到5mm,临界冷却速率约为126.8K/s。采用Jackson-Hunt公式计算了晶化组织形成的冷却速率。当冷却速率在10K/s-120K/s时,晶化组织则出现亚稳初生相与共晶共存的形态。当冷却速率低于10K/s时,亚稳初生相的析出将被逐渐抑制,使得共晶生长方式发生改变。

关 键 词:铜基大块非晶合金  临界冷却速率  共晶组织
文章编号:1002-185X(2007)02-0236-05
修稿时间:2005-12-06

Critical Cooling Rate and Microstructure Evolution of Cu-Based Bulk Amorphous Alloy
Yang Yingjun,Xing Dawei,Sun Jianfei,Wei Sidong,Shen Jun.Critical Cooling Rate and Microstructure Evolution of Cu-Based Bulk Amorphous Alloy[J].Rare Metal Materials and Engineering,2007,36(2):236-240.
Authors:Yang Yingjun  Xing Dawei  Sun Jianfei  Wei Sidong  Shen Jun
Affiliation:1. Harbin Institute of Technology, Harbin 150001, China;2. Aviation University of Air Force, Changehun 130022, China
Abstract:Bulk amorphous Cu52.5Ti30Zr11.5Ni6(at.%) alloys up to 5 mm in diameter were fabricated by a copper mold casting method.The critical cooling rate was determined to be 126.8 K/s by using the Barandiaran-Colmenero expression.Based upon the Jackson-Hunt relation,the cooling rate for the formation of devitrified structure was also evaluated.In the cooling range of 10 K/s ~ 120 K/s,there exists a mixed microstructure of primary metastable phase and eutectic structure.With further decreasing of cooling rate(below 10K/s),the precipitation of metastable phase was depressed,and the growth mode also deviates from the eutectic mode.
Keywords:Cu-Based bulk amorphous alloy  critical cooling rate  eutectic microstructure
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《稀有金属材料与工程》浏览原始摘要信息
点击此处可从《稀有金属材料与工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号