| 坦克发动机缸套超声珩磨系统 |
| |
| 引用本文： | 辛志杰,袁艺,祝锡晶. 坦克发动机缸套超声珩磨系统[J]. 工具技术, 2000, 34(1): 24-25 |
| |
| 作者姓名： | 辛志杰 袁艺 祝锡晶 |
| |
| 作者单位： | 华北工学院,太原,030051 |
| |
| 摘 要： | 研制了用于加工坦克发动机缸套（ 孔径１５０ｍｍ）的超声珩磨系统样机，通过工艺试验优选了油石条参数及加工工艺参数。试验结果表明，该样机可满足坦克发动机缸套的珩磨加工要求。
|
| 关 键 词： | 超声珩磨 发动机缸套 样机 优选参数 |
| 修稿时间： | 1999-07-00 |
Ultrasonic Honing System for Cylinder Sleeve of Tank's Engine |
| |
| Xin Zhijie et al. Ultrasonic Honing System for Cylinder Sleeve of Tank's Engine[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2000, 34(1): 24-25 |
| |
| Authors: | Xin Zhijie et al |
| |
| Affiliation: | Xin Zhijie et al |
| |
| Abstract: | A prototype of ultrasonic honing system for machining the cylinder sleeve with diameter 150mm of tank's engine is developed. The oilstone parameters and process parameters are optimized through process tests. The result of honing experiment shows that the process requirement of honing the cylinder sleeve of tank's engine can be satisfied by using the prototype. |
| |
| Keywords: | ultrasonic honing cylinder sleeve of engine prototype optimized parameter |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
