| Taguchi DOE实验设计法注射成型工艺参数优化 |
| |
| 引用本文： | 黄娜斌,江波,张志莲,李翱. Taguchi DOE实验设计法注射成型工艺参数优化[J]. 工程塑料应用, 2007, 35(6): 28-32 |
| |
| 作者姓名： | 黄娜斌 江波 张志莲 李翱 |
| |
| 作者单位： | 北京化工大学机电工程学院,北京,100029;北京化工大学机电工程学院,北京,100029;北京化工大学机电工程学院,北京,100029;北京化工大学机电工程学院,北京,100029 |
| |
| 摘 要： | 将CAE技术与DOE技术相结合,可在较少的分析次数下自动获得优化工艺,从而改善注塑制品的质量。以一工业用注塑制品为例,采用Taguchi DOE实验方法进行实验分析,研究了工艺参数对注塑制品体积收缩率变化和翘曲变形的影响,获得的优化工艺参数可使其体积收缩率变化和翘曲变形达到最小。结合CAE模拟分析结果,通过样件试制对优化的工艺参数进行了验证。
|
| 关 键 词： | 注射成型 计算机辅助工程 工艺参数优化 收缩 翘曲 Taguchi |
| 修稿时间： | 2007-04-06 |
OPTIMIZATION OF INJECTION MOLDING PROCESS PARAMETERS BY TAGUCHI DOE TECHNIQUE |
| |
| Huang Nabin, Jiang Bo, Zhang Zhilian. OPTIMIZATION OF INJECTION MOLDING PROCESS PARAMETERS BY TAGUCHI DOE TECHNIQUE[J]. Engineering Plastics Application, 2007, 35(6): 28-32 |
| |
| Authors: | Huang Nabin Jiang Bo Zhang Zhilian |
| |
| Affiliation: | College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing 100029, China |
| |
| Abstract: | The combination of CAE and Taguchi DOE (design of experiment) techniques is to optimize the process parameters automatically by less experiment so as to improve the part quality. An orthogonal array based on Taguchi DOE method is conducted to study the warpage problem related to the shrinkage variation depended on process parameters, obtaining optimum process parameters can minimize the index of shrinkage variation and warpage. Compared with CAE analysis result, a number of tests are performed to prove the effectiveness of optimum process parameter. |
| |
| Keywords: | injection molding CAE process optimization shrinkage warpage Taguchi DOE |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
