| 基于面结构光的三维内轮廓测量系统数学建模 |
| |
| 引用本文： | 唐燕,赵辉,陶卫,王占斌. 基于面结构光的三维内轮廓测量系统数学建模[J]. 计算机测量与控制, 2007, 15(6): 703-706 |
| |
| 作者姓名： | 唐燕 赵辉 陶卫 王占斌 |
| |
| 作者单位： | 上海交通大学,仪器科学与工程系,上海,200240;上海交通大学,仪器科学与工程系,上海,200240;上海交通大学,仪器科学与工程系,上海,200240;上海交通大学,仪器科学与工程系,上海,200240 |
| |
| 摘 要： | 提出了一种非接触式快速获取三维内轮廓尺寸的检测方法--面结构光投影测量法,基于该法设计了一种光电探测装置,用于对内表面呈圆台体的钢管内尺寸进行测量;分析了该装置在测量时的光路结构原理,建立相应的数学模型,在CCD拍摄的图像中,根据此模型,成像光斑质心的二维坐标值可转换为对应的空间三维坐标值,从而计算钢管不同截面内轮廓尺寸以及母线长度,进而获得完整的三维内轮廓形状信息;根据实验结果表明,该测量模型是正确且可行的.
|
| 关 键 词： | 面结构光 内轮廓测量 数学建模 |
| 文章编号： | 1671-4598（2007）06-0703-04 |
| 收稿时间： | 2006-09-13 |
| 修稿时间： | 2006-09-132006-10-29 |
Modeling of Three-Dimensional Inner Profile Measurement System by Using Surface Structured Light Method |
| |
| Tang Yan,Zhao Hui,Tao Wei,Wang Zhanbin. Modeling of Three-Dimensional Inner Profile Measurement System by Using Surface Structured Light Method[J]. Computer Measurement & Control, 2007, 15(6): 703-706 |
| |
| Authors: | Tang Yan Zhao Hui Tao Wei Wang Zhanbin |
| |
| Affiliation: | Dept. of Instrument Science and Engineering, Shanghai JiaoTong University, Shanghai 200240, China |
| |
| Abstract: | A method named surface structured light projection is presented, by which we can capture the size of three-dimensional inner profile without any contact and based on which we design the photoelectric detection device for measuring the inner dimensions of the pipes with the inner profile of a frustum of a cone. The geometry of the light path of the former device is analyzed, using the math model, the three-dimensional coordinate values of the centroid of spot are calculated , then the diverse inner profile dimensions under different sections and the length of the bus bars in order to obtain the entire three-dimensional inner profile are figured out. Finally, the correctness and feasibility of the model are validated by the experimental results. |
| |
| Keywords: | surface structured light inner profile measurement modeling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
