| H13钢压铸模具真空高压气淬变形控制的探讨 |
| |
| 引用本文： | 刘桂平.H13钢压铸模具真空高压气淬变形控制的探讨[J].热处理,2000(4):38-41. |
| |
| 作者姓名： | 刘桂平 |
| |
| 作者单位： | 广州型腔模具厂,510000 |
| |
| 摘 要： | 分析了真空淬火件发生变形的原因，探讨了真空高压气淬时H13钢压铸模淬火变形的控制方法，在实际生产应用中取得了良好的效果和经济效益。
|
| 关 键 词： | 真空高压气淬 H13钢压铸模 变形控制 |
| 文章编号： | 1008-1690(2000)04-0038-04 |
| 修稿时间： | 1999年6月23日 |
Discussion on the Distortion Controll of Vacuum-High-Pressure-Gas-Quenched H13 Die Casting Die |
| |
| Liu Gui-Ping.Discussion on the Distortion Controll of Vacuum-High-Pressure-Gas-Quenched H13 Die Casting Die[J].Heat Treatment,2000(4):38-41. |
| |
| Authors: | Liu Gui-Ping |
| |
| Affiliation: | Guangzhou Cavity Die Factory |
| |
| Abstract: | The causes for the distortion of vacuum-quenched workpieces are analyzed. The distortion controll method of H13 die casting die quenched under vacuum high pressure gas is discussed. As a result,good effect and economic benefit have been gained in production. |
| |
| Keywords: | vacuum high pressure gas quenching die casting die of H13 steel distortion controll |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
