首页 | 本学科首页   官方微博 | 高级检索  
     

火灾烟气中CO和烟颗粒的光声复合探测方法
引用本文:陈涛,苏国锋,申世飞,袁宏永. 火灾烟气中CO和烟颗粒的光声复合探测方法[J]. 传感技术学报, 2006, 19(3): 597-601
作者姓名:陈涛  苏国锋  申世飞  袁宏永
作者单位:清华大学,公共安全研究中心,北京,100084;清华大学,公共安全研究中心,北京,100084;清华大学,公共安全研究中心,北京,100084;清华大学,公共安全研究中心,北京,100084
摘    要:利用气体滤波光声技术和光散射原理测量早期火灾烟气中CO和烟颗粒浓度的方法和系统.分别采用两个气体滤波光声腔的作为CO测量光声腔和烟雾参比光声腔,在光源和光声腔之间建立火灾烟气的测量路径,记录其进入该路径后光声信号强度的变化,通过两个滤波波长上CO吸收和烟颗粒消光的相关处理,同时得到CO浓度和烟雾浓度.

关 键 词:光声技术  火灾产物  CO  粒子散射
文章编号:1004-1699(2006)03-0597-05
收稿时间:2005-07-18
修稿时间:2005-07-18

Photoacoustic Combined Sensing for CO and Smoke in Fire Products
Chen Tao,Su Guo-feng,Shen Shi-fei,Yuan Hong-yong. Photoacoustic Combined Sensing for CO and Smoke in Fire Products[J]. Journal of Transduction Technology, 2006, 19(3): 597-601
Authors:Chen Tao  Su Guo-feng  Shen Shi-fei  Yuan Hong-yong
Affiliation:Center for Public Safety Research, Tsinghua University, Beijing 100084, China
Abstract:This paper presents a photoacoustic method to meter CO and smoke concentration simultaneously in early fire situation. Fire products, including gaseous components and smoke particles, were metered in the measuring path between the light source and the photoacoustic cells. Based on gas filter technology and particle scattering theory, a CO gas cell and a reference gas cell were used together to meter the light attenuation caused by CO absorption and smoke particles extinction at two different wave lengths. When the fire products entered the measuring path, CO concentration and smoke optical density were obtained by processing the photoacoustic signal attenuation of the two cells.
Keywords:CO
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《传感技术学报》浏览原始摘要信息
点击此处可从《传感技术学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号