首页 | 本学科首页   官方微博 | 高级检索  
     

开孔型橡塑多孔材料的应力-应变行为
引用本文:崔毅,王宗宝,沙鹏宇,窦艳丽,王国英. 开孔型橡塑多孔材料的应力-应变行为[J]. 塑料工业, 2003, 31(8): 35-37,18
作者姓名:崔毅  王宗宝  沙鹏宇  窦艳丽  王国英
作者单位:1. 中国科学院长春应用化学研究所,吉林,长春,130022
2. 吉林大学材料学院,吉林,长春,130025
基金项目:中国科学院知识创新工程重大项目(KZCX1 SW 19 5 0 4)
摘    要:研究了拉伸应力对开孔型橡胶一塑料多孔材料形态结构和力学性能的影响。结果表明:拉伸应力的增加使橡塑多孔材料产生了形变,导致了气泡孔孔径、透水率的增大。不同定伸长率试样的回缩率是有差异的,定伸长愈大,试样的回缩形变就愈大;回缩形变随时间的变化主要发生在拉伸试样恢复期的初期,30d后试样的形变基本稳定。

关 键 词:开孔型橡塑多孔材料 应力-应变 橡塑共混材料 熔融挤出 聚乙烯
文章编号:1005-5770(2003)08-0035-03

Stress-strain Behavior of Open Cell Porous Rubble-thermoplastics Blend
CUI Yi ,WANG Zong bao ,SHA Peng yu ,DOU Yan li ,WANG Guo ying. Stress-strain Behavior of Open Cell Porous Rubble-thermoplastics Blend[J]. China Plastics Industry, 2003, 31(8): 35-37,18
Authors:CUI Yi   WANG Zong bao   SHA Peng yu   DOU Yan li   WANG Guo ying
Affiliation:CUI Yi 1,WANG Zong bao 1,SHA Peng yu 1,DOU Yan li 2,WANG Guo ying 1
Abstract:This article mainly discussed and analyzed the effect of tensile stress on the structure and mechanical properties of rubble thermoplastics blend system The results showed that the increase of tensile stress made the rubble thermoplastics blends deformed,which led to the increases of the cell diameter and the water saturating rate in the open cell materials The contracting rate of different samples elongated was different,the larger the elongation was,the more obvious the deformation Changes of the contracting deformation mainly occurred during the initial step of the convalescent of the sample,and 30 days afterwards,the deformation of sample became stable on the whole
Keywords:Rubble thermoplastics Blend  Open Cell Porous Rubble thermoplastics Blend  Stress strain  Melting Extrusion  PE  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号