| 20R+0Cr18Ni10Ti不锈复合钢板的焊接 |
| |
| 引用本文： | 王红梅,王秀芹,李建国.20R+0Cr18Ni10Ti不锈复合钢板的焊接[J].山东化工,2007,36(4):31-33. |
| |
| 作者姓名： | 王红梅 王秀芹 李建国 |
| |
| 作者单位： | 1. 山东海化集团潍坊庆丰设备工程有限公司,山东,潍坊,261011
2. 山东海化集团潍坊东明消防器材有限公司,山东,潍坊,261061 |
| |
| 摘 要： | 根据实验和施工实践,介绍了20R 0Cr18Ni10Ti复合钢板的焊接工艺,分析了复合钢板在焊接过程中常出现的焊接裂纹与产生原因,研究了防止与消除缺陷的工艺措施。
|
| 关 键 词： | 复合不锈钢板 焊接工艺 焊接裂纹 |
| 文章编号： | 1008-021X(2007)04-0031-03 |
| 修稿时间： | 2007年1月11日 |
Welding of 20R+0Cr18Ni10Ti Stainless Steel Clad Plate |
| |
| WANG Hong-mei,WANG Xiu-qin,LI Jian-guo.Welding of 20R+0Cr18Ni10Ti Stainless Steel Clad Plate[J].Shandong Chemical Industry,2007,36(4):31-33. |
| |
| Authors: | WANG Hong-mei WANG Xiu-qin LI Jian-guo |
| |
| Abstract: | According to the practices and experiments,the welding technology of 20R 0Cr18Ni10Ti stainless steel clad plate was introduced,the reasons why weld cracks usually were emerged when the composite stainless steel is welded were analyzed.The welding technology to prevent and avoid weld defects was summarized and developed. |
| |
| Keywords: | composite stainless steel plate welding technology weld crack |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
