首页 | 本学科首页   官方微博 | 高级检索  
     

利用单端工频量的高压输电线路故障测距实用方法研究
引用本文:束洪春,高峰,李卫东. 利用单端工频量的高压输电线路故障测距实用方法研究[J]. 电工技术学报, 1998, 0(5)
作者姓名:束洪春  高峰  李卫东
作者单位:云南工业大学,东北电力学院
基金项目:国家电工学科博士后基金,云南省应用基础基金,青年基金
摘    要:基于模分量分析,提出了自故障线路两端仅利用本地信息准确定位短路点的实用方法。短路过渡阻抗、线路分布电容和对侧系统运行阻抗等因素对新算法测距精度影响较小,且故障线路两侧之间不需通信联系、不受通信技术条件限制,测距方程不存在伪根问题。同时指出,基于双侧电源线路模型的测距算法一般不能直接用于环网中的线路故障测距。

关 键 词:输电线路  故障  测距  定位

A Practical Fault Location Algorithm for HV Transmission Line Using One End Data
Shu Hongchun Gao Feng. A Practical Fault Location Algorithm for HV Transmission Line Using One End Data[J]. Transactions of China Electrotechnical Society, 1998, 0(5)
Authors:Shu Hongchun Gao Feng
Affiliation:Shu Hongchun Gao Feng (Yunnan Polytechnic University) Li Weidong(Northeast China Institute)
Abstract:Based on the modal analysis,the practical fault location scheme,using local terminal data to estimate fault distance from itself end respectively,is proposed.The locating fault accuracy is almost insensitive to shunt capacitance,transient impedance and remote source impedance.The new technique does not require real communication between two ends,and has no false root generally.Meanwhile,it is proposed that the fault location algorithm based on two terminal line model is not suitable for these lines operating in circle high tension.
Keywords:Power transmission line Fault location Electromagnetic transient
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号