| 机械式低频振动攻丝切削力实验研究 |
| |
| 引用本文： | 郑建明,肖继明,李言,袁启龙,李鹏阳,薛万夫. 机械式低频振动攻丝切削力实验研究[J]. 新技术新工艺, 2000, 0(8): 18-19 |
| |
| 作者姓名： | 郑建明 肖继明 李言 袁启龙 李鹏阳 薛万夫 |
| |
| 作者单位： | 西安理工大学,710048 |
| |
| 基金项目： | 陕西省教委专项基金资助项目! (项目编号 99JK2 2 3) |
| |
| 摘 要： | 本文根据振动攻丝基本原理，研制出具有振动攻丝功能的振动攻丝卡头，并利用该卡头对振动攻丝切削力变化特点进行了大量的实验研究。结果表明采用振动攻丝切削力呈现出理想的波形化效果，切削力峰值略低于普通攻丝，切削力平均值为普通攻丝的１／５～１／２。
|
| 关 键 词： | 振动攻丝 切削力 峰值 平均值 实验研究 |
Experiment Research on Cutting Force of Mechanical Low Frequency Vibratory Tapping |
| |
| Zheng Jianming,Xiao Jiming,Li Yan,Yuan Qilong,Li Pengyang,Xue Wanfu. Experiment Research on Cutting Force of Mechanical Low Frequency Vibratory Tapping[J]. New Technology & New Process, 2000, 0(8): 18-19 |
| |
| Authors: | Zheng Jianming Xiao Jiming Li Yan Yuan Qilong Li Pengyang Xue Wanfu |
| |
| Abstract: | This paper developed a vibratory tapping chuck base on vibratory cutting principle.The characteristic of the vibratory cutting force using the chuck is investigated by large number of experiments. The results show that the cutting force of the vibratory tapping has the feature of desired wave, the peak value of the cutting force is a little lower than the traditional tapping and the mean value of the cutting force is only half to one fifty of the traditional tapping. |
| |
| Keywords: | vibratory tapping cutting force peak value mean value |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
