| 新型对焊机传动控制的研究 |
| |
| 引用本文： | 王元良,周友龙,方培泉,胡久富,李蔷.新型对焊机传动控制的研究[J].电焊机,2006,36(8):22-24. |
| |
| 作者姓名： | 王元良 周友龙 方培泉 胡久富 李蔷 |
| |
| 作者单位： | 西南交通大学,四川,成都,610031;四川省建筑科学研究院,四川,成都,610081 |
| |
| 摘 要： | 在数控切割生产领域，采用先进的数控切割系统和技术，升级改造落后的数控系统，从而实现有效的节省钢材，提高切割效率和切割质量。
|
| 关 键 词： | 钢筋闪光焊 凸轮传动对焊机 曲柄传动对焊机 |
| 文章编号： | 1001-2303(2006)08-0022-03 |
| 收稿时间： | 2005-10-30 |
| 修稿时间： | 2005年10月30 |
New dirve control method for butt welding machine |
| |
| WANG Yuan-liang,ZHOU You-long,FANG Pei-quan,HU Jiu-fu,LI Qing.New dirve control method for butt welding machine[J].Electric Welding Machine,2006,36(8):22-24. |
| |
| Authors: | WANG Yuan-liang ZHOU You-long FANG Pei-quan HU Jiu-fu LI Qing |
| |
| Affiliation: | l.Southwest Jiaotong University, Chengdu 610031, China ; 2,Sichuan Construction Research Insititute, Chengdu 610081 , China |
| |
| Abstract: | This paper analyzes butt welding process, determines the welding parameters, studies the melting rule of flash butt welding for rebar,compares the serveral drive type of automatic flash butt welding machines and describes the automated remold based on thetraditional drive equipment of traditional manual lever type butt resistanee welding machine UN1-100.It also deserihes that using the plan of DC crank drive to replace the plan of AC cam drive,not only can simulate the s-t curve of cam drive,but also may adjust the s-t curve in large extent to meet the requirement of many kinds of cremation entre by adjusting such parameters,such as the voltage progression of main maehine,voltage of engine and so on. |
| |
| Keywords: | flash butt welding for rebars butt welding machine with cam drive butt welding machine with crank drive |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
