| FCS与DCS混合式集成控制系统研究 |
| |
| 引用本文： | 吴瑞明,蒋志峰.FCS与DCS混合式集成控制系统研究[J].组合机床与自动化加工技术,2005(10):62-63,65. |
| |
| 作者姓名： | 吴瑞明 蒋志峰 |
| |
| 作者单位： | 浙江科技学院,机电系,杭州,310012 |
| |
| 摘 要： | 针对不同控制系统的兼容和升级问题,通过分析FCS和DCS两种控制方式的优缺点,提出了混合式集成控制系统,并从FCS和DCS输入输出总线的集成、FCS和DCS网络的集成、FCS和DCS的系统集成三个方面进行了阐述.通过基于CAN现场总线的多轴超声检测系统,对混合式集成控制系统进行了应用分析.FCS/DCS的混合式集成控制系统方便了原有控制系统的升级,并且提高了系统的可靠性.
|
| 关 键 词： | 混合控制系统 CAN总线 超声检测 |
| 文章编号： | 1001-2265（2005）10-0062-02 |
| 收稿时间： | 2005-04-25 |
| 修稿时间： | 2005-04-25 |
Composite Control System Based on FCS and DCS |
| |
| WU Rui-ming,JIANG Zhi-feng.Composite Control System Based on FCS and DCS[J].Modular Machine Tool & Automatic Manufacturing Technique,2005(10):62-63,65. |
| |
| Authors: | WU Rui-ming JIANG Zhi-feng |
| |
| Affiliation: | Department of Electromechanical Engineering, Zhejiang University of Science and Technology, Hangzhou 310012, China |
| |
| Abstract: | Because of incompatibility between different control system, the upgrade of control system is difficult. Through analyse the relative merits of FCS and DCS, Composite control system was developed. The composite models of FCS and DCS had three part, it was I/O composite, network composite and system composite. The composite control system was validated by multi spindle ultrasonic detection system. CAN bus was introduced in this test system. Composite control system helped to the upgrade of old control system and improved its reliability. |
| |
| Keywords: | FCS DCS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
