恒流源充电二极管放电的互感值测量方法 |
| |
引用本文: | 欧阳斌林,周修理,初永良,杨方,刘盼盼.恒流源充电二极管放电的互感值测量方法[J].测控技术,2013,32(12):4-8. |
| |
作者姓名: | 欧阳斌林 周修理 初永良 杨方 刘盼盼 |
| |
作者单位: | 东北农业大学 电气与信息学院;东北农业大学 电气与信息学院;东北农业大学 电气与信息学院;东北农业大学 电气与信息学院;东北农业大学 电气与信息学院 |
| |
基金项目: | 黑龙江省创新训练计划项目(201210224030) |
| |
摘 要: | 介绍恒流源充电二极管放电的互感值的测量方法。其测量原理是采用开关电路,以恒流源电路向互感器的原边线圈充电,只经过二极管放电,定时测量稳定放电的时间和副边线圈的开路电压来测量互感值。分别论述了测量原理,并设计了试验和标定方法,通过试验和数据分析证明这种互感值测量位移的方法可行,不采用高频正弦激励,即可测量较小的互感值。
|
关 键 词: | 互感值 变压器 电感值 开关电感 线圈电压 |
Mutual Inductance Measurement by Charging with the Constant Current Circuit and Discharging Through a Diode |
| |
Abstract: | The mutual inductance measurement is introduced by charging with the constant current circuit and discharging through a diode with switching two-winding transformer.The mutual inductance measurement principle is that using the switching circuit and the constant current circuit to charge the primary winding,and then only through a diode discharging,the mutual inductance is determined by measuring the stable discharge time and the open-circuit voltage of the secondary winding.The principle is discussed,and the test and calibration method are designed.Experiments and data analysis prove that the mutual inductance measurement is feasible,and it can measure a smaller mutual inductance without using a high frequency sinusoidal excitation. |
| |
Keywords: | mutual inductance transformer inductance switched inductor winding voltage |
|
| 点击此处可从《测控技术》浏览原始摘要信息 |
|
点击此处可从《测控技术》下载全文 |