TEM observations of dislocation emission at crack tips in aluminium

Direct observations were made of the propagation of ductile cracks and associated dislocation behaviour at crack tips in aluminium during tensile deformation in an electron microscope. In the electropolished area, the cracks propagated as a Mode III shear-type by emitting screw dislocations on a plane coplanar to the crack plane. A zone free of dislocations was observed between the crack tip and the plastic zone. As the cracks propagated into thicker areas, the fracture mode changed from Mode III to predominantly Mode I. The crack top of the Mode I cracks was blunted by emitting edge dislocations on planes inclined to the crack plane. The blunted cracks did not propagate until the area ahead of the crack tip was sufficiently thinned by plastic deformation. The cracks then propagated abruptly, apparently without emitting dislocations. The stress intensity factor was measured from the crack tip geometry of Mode III cracks and it was found to be in good agreement with the critical value of the stress intensity factor required for dislocation generation.