首页 | 本学科首页   官方微博 | 高级检索  
     

基于3D空间信道模型的3D波束赋形技术研究
引用本文:严华亮,魏克军,陈宇. 基于3D空间信道模型的3D波束赋形技术研究[J]. 电信网技术, 2013, 0(5): 38-42
作者姓名:严华亮  魏克军  陈宇
作者单位:[1]北京邮电大学网络体系构建与融合重点实验室 [2]工业和信息化部电信研究院通信标准研究所
摘    要:移动数据流量爆炸式增长对小区吞吐量提出了更高的要求,同时智能终端的急剧增多,使终端之间的信号干扰越来越严重。传统基站天线阵列下倾角是固定的,波束之间干扰较大。随着有源天线技术的逐渐成熟,通过垂直维度的波束赋形动态改变天线的下倾角已经成为可能。本文通过分析已有的空间信道模型,研究了基于球形坐标系统的空间信道模型的建模方法,为3D动态波束赋形技术评估提供了信道基础;并且在提出的3D信道模型基础上评估了动态调整波束的下倾角可以减少用户之间的干扰,提高小区的吞吐量。

关 键 词:天线阵列  3D信道模型  波束赋形  干扰减少

3D Beamforming Based on 3D Spatial Channel Model
Abstract:With the rapid increasment of the mobile data traffic, it is a big challenge to the cell throughout. And with the growth of the smart terminal, the interference between the terminals is more serious. The traditional antenna array of base station has the fixed down tilt for all the terminals, so the beam interferes each other. But now it is possible to adapt the antenna down tilt to the terminals according to the channel information because of the technique of the active array system. This article introduced a new modeling method to three dimension(3D) channel based on the analyse of the existing channel model. It also estimated the performance of the vertical dynamic beamforming by simulating on the 3D channel model.
Keywords:antenna array   3D channel model   beamforming   interference reducing
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号