| 铝合金汽车前碰撞横梁的轻量化设计与碰撞性能分析 |
| |
| 引用本文： | 王冠,周佳,刘志文,李落星,刘波,李晓青,刘扬胜.铝合金汽车前碰撞横梁的轻量化设计与碰撞性能分析[J].中国有色金属学报,2012,22(1):90-98. |
| |
| 作者姓名： | 王冠 周佳 刘志文 李落星 刘波 李晓青 刘扬胜 |
| |
| 作者单位： | 1. 湖南大学汽车车身先进设计制造国家重点实验室,长沙410082;湖南大学材料科学与工程学院,长沙410082
2. 重庆长安汽车股份有限公司汽车工程研究院车身技术研究所,重庆,401120 |
| |
| 基金项目： | 高等学校博士学科点专项科研基金资助项目(20090161110027);湖南省杰出青年基金资助项目(09JJ1007);重庆市科技攻关计划项目CSTC,2007AA4008);湖南大学汽车车身先进设计制造国家重点实验室自主课题(61075005) |
| |
| 摘 要： | 基于显式动力学有限元分析软件,以混合细胞自动机(HCA)作为优化计算模型,对铝合金前碰撞横梁的结构进行优化设计。针对拓扑优化结果,采用模拟退火法优化横梁壁厚尺寸,获得薄壁、中空且带有加强筋结构的铝合金前碰撞横梁设计方案。以6061铝合金前碰撞横梁替代某车型原钢质横梁,通过台车碰撞进行仿真模拟与实验验证。结果表明:铝合金前碰撞横梁比原钢质前碰撞横梁质量减轻了25%,且具有较高的抗弯曲强度,低速碰撞下,铝合金前碰撞横梁较原钢质件系统吸能提高了45.6%。
|
| 关 键 词： | 铝合金 碰撞横梁 混合细胞自动机 吸能性能 拓扑优化 |
Lightweight design and crash performance analysis of automotive aluminum bumper |
| |
| WANG Guan
,
ZHOU Jia
,
LIU Zhi-wen
,
LI Luo-xing
,
LIU Bo
,
LI Xiao-qing
,
LIU Yang-sheng.Lightweight design and crash performance analysis of automotive aluminum bumper[J].The Chinese Journal of Nonferrous Metals,2012,22(1):90-98. |
| |
| Authors: | WANG Guan ZHOU Jia LIU Zhi-wen LI Luo-xing LIU Bo LI Xiao-qing LIU Yang-sheng |
| |
| Affiliation: | 1.State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University, Changsha 410082,China; 2.College of Materials Science and Engineering,Hunan University,Changsha 410082,China; 3.Body Technology Research Department,Automotive Engineering Institute,Chongqing Changan Automobile Co.Ltd., Chongqing 401120,China) |
| |
| Abstract: | The finite element analysis software based on explicit dynamic method was applied to the topology optimization of aluminum bumper using hybrid cellular automata(HCA) as an optimizing model.The results of topology optimization show that the simulated annealing method can be used for the optimization design of the bumper thickness,and the thin-walled,hollow aluminum bumper with reinforced ribs is obtained.The original steel bumper was replaced by 6061 aluminum alloy.Both the car crash simulation and experiment were performed.The results indicate that the mass of aluminum bumper is 25% lighter than that of the original steel bumper.The aluminum bumper has higher flexural strength than the original steel bumper.At the same time,the crash energy absorption of the aluminum bumper system is 45.6% higher than that of the original steel bumper system in low-speed collision. |
| |
| Keywords: | aluminum alloy bumper hybrid cellular automata energy absorption topology optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
