首页 | 本学科首页   官方微博 | 高级检索  
     

大颗粒交联聚苯乙烯白球的聚合工艺
引用本文:徐孝旭,洪哲,于永鹏.大颗粒交联聚苯乙烯白球的聚合工艺[J].高分子材料科学与工程,2010(9).
作者姓名:徐孝旭  洪哲  于永鹏
作者单位:辽东学院化工与材料学院;
基金项目:丹东明珠特种树脂有限公司项目资助; 辽东学院重点培育学科资助
摘    要:研究了大颗粒交联聚苯乙烯白球的制备工艺,着重探讨了搅拌速度、反应温度、分散剂类型及用量、引发剂用量、致孔剂的用量、搅拌桨的大小与位置高低等因素对其粒径大小及分布的影响,确定了产品粒径主要位于1.5mm~3.5mm范围内的聚合工艺条件为:油相/水相的体积比为2∶1,聚乙烯醇的含量为3%,磷酸钙的用量为0.45%,过氧化二苯甲酰用量为0.9%,固体石蜡的用量为24%,实行分段控制搅拌速度、分段控温,同时要求搅拌桨位于油层以下1cm~2cm处。

关 键 词:聚苯乙烯  悬浮聚合  粒径  交联剂  

The Polymerization Technology of Bigger Crosslinked Polystyrene Spheres
XU Xiao-xu,HONG Zhe,YU Yong-peng.The Polymerization Technology of Bigger Crosslinked Polystyrene Spheres[J].Polymer Materials Science & Engineering,2010(9).
Authors:XU Xiao-xu  HONG Zhe  YU Yong-peng
Affiliation:XU Xiao-xu,HONG Zhe,YU Yong-peng(College of Chemical Engineering and Material,Eastern Liaoning University,Dandong 118004,China)
Abstract:The preparation technology of bigger crosslinked polystyrene microspheres was studied. The effect of stirrer speed,reaction temperature,type and concentration of dispersant agent,ratio of oil and water phase,mass ratio of monomer and crosslinking agent,initiator and porogenic agent content on the particle size and distribution was discussed. The particle size of polystyrene spheres is from 1.5 mm to 3.5 mm,and the optimum operating condition obtained is that volume ratio of oil and water phase is 2:1,conten...
Keywords:polystyrene  suspension polymerization  particle size  crosslinking agent  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号