首页 | 本学科首页   官方微博 | 高级检索  
     

转子磁场定向矢量控制中异步电机铁损模型分析
引用本文:吕昊,马伟明,聂子玲,揭贵生.转子磁场定向矢量控制中异步电机铁损模型分析[J].电机与控制应用,2004,31(2):10-13.
作者姓名:吕昊  马伟明  聂子玲  揭贵生
作者单位:海军工程大学电力电子技术研究所,湖北,武汉,430033
摘    要:异步电机的数学模型通常是忽略铁损的,也是可行的.然而实际上电机的铁损是真实存在的,特别是在效率的分析上,铁损不可忽略.在现有的两种考虑铁损的异步电机模型中,串联铁损模型在磁场定向中不可行,因此本文重点对采用并联铁损模型在磁场定向矢量控制中的应用作深入分析.根据此模型进行数值仿真,仿真与试验结果的比较证明,研究磁场定向时应采用考虑铁损的模型.

关 键 词:异步电机  铁损  数学模型  转子磁场定向控制
修稿时间:2003年7月18日

Analysis of Mathematical Model for Induction Motor Including Iron Loss in Rotor-flux-oriented Control
Lv Hao,Ma Weiming,Nie Ziling,Jie Guisheng.Analysis of Mathematical Model for Induction Motor Including Iron Loss in Rotor-flux-oriented Control[J].Electric Machines & Control Application,2004,31(2):10-13.
Authors:Lv Hao  Ma Weiming  Nie Ziling  Jie Guisheng
Affiliation:Naval University of Engineering
Abstract:The iron loss is usually ignored in mathematical model of induction motor, and this is also feasible in practice. But the iron loss of motor exists actually, especially in analysis for efficiency. This paper introduces two mathematical models which take iron loss into account. The analysis shows the core-loss resistance in series is not suitable in RFOC, and the numerical results of core-loss resistance in parallel in application to steady state of RFOC are obtained by calculation. Based on d-q coordinate system the mathematical model closed to reality is created for induction motor. Simulation results demonstrate the effectiveness of this method.
Keywords:Induction motor  Iron loss  Mathematical model  Rotor-flux-oriented control
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号