Alginate-calcium films: Water vapor permeability and mechanical properties as affected by plasticizer and relative humidity |
| |
Authors: | Guadalupe I. Olivas,Gustavo V. Barbosa-Cá novas |
| |
Affiliation: | a Centro de Investigación en Alimentación y Desarrollo, A.C., Av. Río Conchos s/n Cd. Cuauhtémoc, Chih., CP 31570, México b Washington State University, Biological Systems Engineering Department, LJ Smith 220, P.O. Box 646120, Pullman, WA 99164-6120, USA |
| |
Abstract: | Alginate films containing dissimilar amounts of guluronate (G) and mannuronate (M): M/G∼0.45 and M/G∼1.5, soaked in a calcium chloride solution up to 20 min were evaluated for water vapor permeability (WVP). M/G∼0.45 films proved to be better moisture barriers at all calcium immersion times compared to M/G∼1.5. WVP of M/G∼0.45 and M/G∼1.5 films decreased as time of immersion in calcium increased; after 3 min, a decrease in WVP was observed. M/G∼0.45 films soaked for 1 min in calcium were further analyzed to determine the effect of plasticizer and relative humidity (RH) on their mechanical properties and WVP, using fructose, glycerol, sorbitol, and polyethylene glycol (PEG-8000). Films without plasticizer showed a lower capacity to adsorb water compared to those with plasticizer. As RH increased, tensile strength (TS) decreased and elongation (E) increased for all films. This effect was more pronounced on films containing plasticizer, which had lower TS at all RHs. Plasticizer did not increase E at 58% RH. At 78% and 98% RH, glycerol, sorbitol and fructose showed a significant increase in E compared to PEG-8000 and no-plasticizer. PEG-8000 provided lower TS and E, while glycerol showed the highest among all plasticizers. There was no difference on WVP between no-plasticizer and glycerol. Fructose and sorbitol showed the lowest WVP while PEG-8000 showed the highest. |
| |
Keywords: | Edible films Water vapor permeability Mechanical properties Alginate Relative humidity Plasticizer |
本文献已被 ScienceDirect 等数据库收录! |
|