| 铁路运输罐形容器的静强度分析 |
| |
| 引用本文： | 许晓丰,张大千,高金贺. 铁路运输罐形容器的静强度分析[J]. 机械设计与制造, 2006, 0(4): 25-27 |
| |
| 作者姓名： | 许晓丰 张大千 高金贺 |
| |
| 作者单位： | 1. 沈阳航空工业学院,沈阳,110034
2. 沈阳航空工业学院,沈阳,110034;东北大学,沈阳,110004 |
| |
| 摘 要： | 利用有限元ANSYS软件对铁路运输罐形容器进行了静强度分析,同时按传统压力容器的设计计算方法,进行了经验计算。两者相比较,突出了有限元方法的优点,即适应性强,便于得出罐体任意位置的应力和应变。最后,根据计算结果总结出了对改进设计具有较大参考价值的结论。
|
| 关 键 词： | 压力容器 应力 有限元 |
| 文章编号： | 1001-3997(2006)04-0025-03 |
| 收稿时间： | 2005-06-03 |
| 修稿时间： | 2005-06-03 |
The static strength analysis of a railage tank |
| |
| XU Xiao-feng,ZHANG Da-qian,GAO Jin-he. The static strength analysis of a railage tank[J]. Machinery Design & Manufacture, 2006, 0(4): 25-27 |
| |
| Authors: | XU Xiao-feng ZHANG Da-qian GAO Jin-he |
| |
| Affiliation: | 1.Shenyang Institute of Aeronautical Englneenng, Shenyang 110034, China;2.Northeast University, Shenyang 110004, China |
| |
| Abstract: | In this paper, the strength analysis for a railage tank was completed with the finite element method's software ANSYS.In the same time , The experience calculation was done according to the traditional designing mode of a pressure vessel.By comparing them, the good quality of finite element method(FEM) was showed, which it is widely flexible and convenient to get the stress and strain anywhere in the tank. In the end, the conclusions were summarized by results calculated, which was better valuable to improve the tank's design. |
| |
| Keywords: | Pressure cessel Stress The finite element method(FEM) |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
