Heat flow,gap formation and break-outs in the continuous casting of steel slabs

A theoretical investigation of heat flow and gap formation in the mold of a continuous slab caster has been undertaken using a mathematical model, with the ultimate purpose of predicting the casting conditions which can lead to break-outs. The mathematical model that has been developed for this study is capable of treating the heat flow and air gap as coupled phenomena, and can accept operating variables such as slab size, casting speed, mold taper, and thermal conductivity of the mold powder, as input. Four different cases of slab casting have been investigated; and it has been found that hot spots can form on the surface of the slab within a few centimeters of the corners. Depending on their temperature, it is suggested that these hot spots may give rise to the formation of break-outs off the corners of the slab. From an examination of the behavior of the hot spots, the susceptibility of the cases studied to break-outs has been evaluated. The usefulness of the present analysis in qualitatively ascertaining the location and extent of mold wear under different casting conditions has also been examined. A. Grill was formerly affiliated.