Characteristics of diffused-stripe InP/InGaAsP/InP lasers emitting around 1.55 µm |
| |
Authors: | Kawaguchi H. Takahei K. Toyoshima Y. Nagai H. Iwane G. |
| |
Affiliation: | NTT Public Corporation, Musashino-shi, Tokyo, Japan; |
| |
Abstract: | Fabrication and lasing characteristics of InGaAsP/InP lasers emitting around 1.55 μm are described. Zn-diffused stripe-geometry lasers with emission wavelengths in the1.53-1.60mum range were fabricated from InP/InGaAsP/InP DH epitaxial wafers prepared by a low temperature LPE technique. The dependence of the lasing charaeteristics on the stripe width was examined. The lowest threshold current (≃160 mA under CW operation at 27°C) was obtained for a laser with a 13 μm stripe. CW operation of the laser has been achieved at a heat-sink temperature as high as 53°C. For sufficiently narrow stripe widths (simeq6 mum), fundamental-transverse mode and single-longitudinal mode operation was obtained under CW operation. Moreover, the lasers have good high-frequency performance. The lasers showed excellent dynamic properties without waveform distortion under high-frequency (800 Mbits/s) large-signal pulse modulation. The full width at half maximum of the longitudinal mode envelope was approximately 30 Å at 800 Mbits/s. |
| |
Keywords: | |
|
|