Assessments of the kinetic and dynamic loads sustained by stationary tools during high rate plastic forming

A systematic method for evaluating the kinetic and dynamic loads sustained by stationary tools (as opposed to moving tools for which methods already exist) during high rate plastic forming is examined and exemplified by examples. It is essentially based on the momentum theorem for continua for incompressible flow, utilizing kinematically admissible velocity fields. In steady state forming processes (such as rolling, wire drawing, etc.), the difference between the active load (imposed or calculated a priori) and the reactive load, is formulated rigorously, whereas for non-steady processes (forging, impact extrusion, etc.) the formulation gives merely an approximation to the dynamic effects on the tools. The resulting velocity-dependent reactions on the tools are given in terms of two nondimensional numbers, namely, the “kinetic head” (u₀²/σ₀) (called the Euler Number) and the “dynamic head” (ú₀L/σ₀), which includes the machine speed (u₀), machine acceleration ( ), material density , yield strength ₀ and a characteristic dimension of the product, L. The same two non-dimensional heads emerged previously from energy-balance consideration in Ref. 1], while approximating dynamic loads on moving tools, hence a consistency is demonstrated. These heads are unavoidably multiplied by geometrical functions, which typify the specific process under consideration and may amplify (or diminish) the intensity of the dynamic effects. The present work is focussed on quantifying, by the above method, the inherent difference between the reactive load sustained by the non-moving tool (say, a die) and the acting load carried by the moving tool (piston, ram, etc.) In particular cases of very slow processes, these loads are equal by static equilibrium. In some practical processes (like rolling) their difference appears to be relatively small, whereas in others (like impact extrusion) it appears extremely large.