|
|||||
|
|
| 不锈钢基体多模CO2激光熔覆工艺研究 | |
| 引用本文： | 李浩,熊征,曾晓雁.不锈钢基体多模CO2激光熔覆工艺研究[J].热加工工艺,2007,36(3):61-64. |
| 作者姓名： | 李浩 熊征 曾晓雁 |
| 作者单位： | 1. 海军工程大学,理学院,湖北,武汉,430033 2. 海军工程大学,理学院,湖北,武汉,430033;华中科技大学光电子科学与工程学院武汉光电国家实验室,湖北,武汉,430074 3. 华中科技大学光电子科学与工程学院武汉光电国家实验室,湖北,武汉,430074 |
| 摘 要： | 采用多模CO2激光器在不锈钢表面进行激光熔覆,研究了激光熔覆工艺参数对熔覆层微观组织和界面形状的影响。研究表明,离焦量(聚焦镜高度)、扫描速度和激光功率变化将影响激光熔覆层高度和宽度,以及熔化深度。激光熔覆层的宽度为激光线能量和光斑直径的函数,其线性回归方程为W1=AD(1-90VS/P),其相关系数R=0.9976。多模激光熔覆可通过调节离焦量得到界面熔合完整、熔覆质量良好的熔覆层。 |
| 关 键 词： | 激光熔覆 工艺参数 多模CO2激光器 离焦量 |
| 文章编号： | 1001-3814（2007）01-0061-03 |
| 修稿时间： | 2006-12-11 |
Research of Multimode CO2 Laser Cladding Technology on Stainless Steel |
|
| LI Hao,XIONG Zheng,ZENG Xiao-yan.Research of Multimode CO2 Laser Cladding Technology on Stainless Steel[J].Hot Working Technology,2007,36(3):61-64. | |
| Authors: | LI Hao XIONG Zheng ZENG Xiao-yan |
| Affiliation: | 1.College of Science, Naval University of Engineering, Wuhan 430033,China; 2. School of Optoelectronics Science and Engineering, Wuhan National Laboratory for Optoelectronics HUST, Wuhan 430074,China |
| Abstract: | The laser cladding was carried out on stainless steel using multimode CO2 laser,and the effect of laser cladding parameters on the interface shape and microstructure of the cladding layer was studied.The experimental results show that the changes of defocusing distance(focusing mirror height),scanning speed and laser power will influence the height,width and melt depth of the laser clading layers.The width of the laser clading layers is functions of laser liner energy and spot diameter.The equation of liner regression is W1=AD(1-90VS /P ),R=0.9976.The interface fusion integrity and clad layers of good quality can be gotten by regulateing the defocus distance. |
| Keywords: | laser cladding technological parameter multimode CO2 laser defocusing distance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |