Thermodynamics of Liquid Alloys and Metastable Phase Transformations in the Copper - Titanium System

We have used solution calorimetry at temperatures of 1573 K and 1873 K over broad concentration ranges to study the mixing enthalpy of Cu - Ti liquid alloys. The molar mixing enthalpies of the system are significant negative values. We have established the temperature dependence of the molar mixing enthalpies of the system: there is an increase in their exothermicity as the temperature is lowered. The significant negative mixing enthalpies of the system allow us to conclude that the chemical bonds are localized in the studied melts and consequently associates form. We tested this conclusion within ideal associated solution theory, which describes well the results obtained with a set of CuTi and CuTi₂ associates. Using the model obtained, we have calculated the excess thermodynamic functions of mixing (enthalpy, Gibbs free energy, heat capacity) for the liquid alloys. We estimated the Gibbs energies of fcc, bcc, and hcp solutions in the system by the CALPHAD method, using data from the initial sections of the phase diagrams and from the corresponding thermodynamic data. We have calculated the metastable phase equilibria between the limiting solid solutions and the liquid or supercooled liquid phase. It was shown that for the supercooled liquid and the amorphous phase, a broad concentration range of relative thermodynamic stability can be obtained. The concentration range of amorphization of Cu - Ti melts corresponds to the position of the metastable liquidus line and the T₀ line at temperatures close to the temperature range of amorphous solidification. __________ Translated from Poroshkovaya Metallurgiya, Nos. 5–6(443), pp. 67–80, May–June, 2005.