| 少齿差行星齿轮减速器的运动学及动力学仿真 |
| |
| 引用本文： | 刘长喜,王晓宏,李红双,孙超,李小光,胡飞,张岩.少齿差行星齿轮减速器的运动学及动力学仿真[J].黑龙江工程学院学报,2014(2):62-64,69. |
| |
| 作者姓名： | 刘长喜 王晓宏 李红双 孙超 李小光 胡飞 张岩 |
| |
| 作者单位： | [1]黑龙江工程学院机电工程学院,黑龙江哈尔滨150050 [2]沈阳航空航天大学北方科技学院,辽宁沈阳110136 [3]哈尔滨国海星轮传动有限公司,黑龙江哈尔滨150060 |
| |
| 摘 要： | 通过Pro/E三维建模软件进行参数化快速建模,建立精确的少齿差行星齿轮减速器的三维模型。将三维模型导入ADAMS中进行运动学及动力学仿真分析,获得核心单元的运动学及动力学参数及其输出特性曲线。通过该曲线验证减速器模型的运动特性是否满足设计要求,缩短设计周期,节省设计经费；同时获得各个运动零部件上所受的极限载荷,为进行有限元分析提供必要的参数,为结构的优化设计奠定基础。
|
| 关 键 词： | 少齿差 行星轮 三维参数化建模 |
Simulation on the kinematics and dynamics of planetary gear reducer with small tooth number difference |
| |
| LIU Chang-xi,WANG Xiao-hong,LI Hong-shuang,SUN Chao,LI Xiao-guang,HU Fei,ZHANG Yan.Simulation on the kinematics and dynamics of planetary gear reducer with small tooth number difference[J].Journal of Heilongjiang Institute of Technology,2014(2):62-64,69. |
| |
| Authors: | LIU Chang-xi WANG Xiao-hong LI Hong-shuang SUN Chao LI Xiao-guang HU Fei ZHANG Yan |
| |
| Affiliation: | 1. College of Mechanical Engineering, Heilongjiang Institute of Technology, Harbin 150050, China; 2. College of North China Technical, Shenyang Aerospace University, Shenyang 110136, China; 3. Harbin Guohai Planetary Gear Transmission Co. , Ltd. , Harbin 150060 ,China) |
| |
| Abstract: | The accurate model of the planetary gear reducer with small tooth number difference is obtained by means of the rapid parametric 3D model-building based on Pro/E. Then the 3D model is imported into ADAMS to achieve the kinematics and dynamics analysis. The important kinematics and dynamics parameters and the output characteristics curves of the core unit are obtained to verify the requirement of the kinematics performance. So, the design cycle is shortened and the design funding is reduced. The limited loads on the motion components are also obtained to provide the necessary parameters for the finite element analysis and to lay the foundation for the optimization of the structure. |
| |
| Keywords: | small tooth number difference planetary gear 3D parameter modeling |
| 本文献已被 维普 等数据库收录！ |
|
