首页 | 本学科首页   官方微博 | 高级检索  
     

基于 XML 配置解析的车辆电子 FlexRay总线通信技术的研究
引用本文:曾根,吕建国,胡建军,冯亮,李芍.基于 XML 配置解析的车辆电子 FlexRay总线通信技术的研究[J].车辆与动力技术,2015(1).
作者姓名:曾根  吕建国  胡建军  冯亮  李芍
作者单位:中国北方车辆研究所,北京,100072;中国北方车辆研究所,北京,100072;中国北方车辆研究所,北京,100072;中国北方车辆研究所,北京,100072;中国北方车辆研究所,北京,100072
摘    要:为了解决在综合化车辆信息系统软件构件化开发平台中,中央处理机与各采集、执行系统之间的数据通信问题,提出一种基于配置解析的FlexRay通信方法.首先对FlexRay总线通信原理进行分析,利用数据的可存储、可配置等特性将FlexRay总线协议的信息参数配置为XML文件;然后通过总线解析软件,将总线信息对应到相应的编码中,各个软件构件可直接通过编码获得总线信息;最后以实验室仪表盘仿真为例,验证了该方法的可行性.

关 键 词:车辆信息系统  FlexRay  总线  XML  文件  总线解析

Research on FlexRay Communication Technology in Vehicle Electronic System Based on XML File Parsing
ZENG Gen,LV Jian-guo,HU Jian-jun,FENG Liang,LI Shao.Research on FlexRay Communication Technology in Vehicle Electronic System Based on XML File Parsing[J].Vehicle & Power Technology,2015(1).
Authors:ZENG Gen  LV Jian-guo  HU Jian-jun  FENG Liang  LI Shao
Abstract:A method of FlexRay communication based on XML file parsing was proposed to solve the problem of the communication between Center Core Processor Computer and the acquisition or executive system above the embedded component-based software platform in the vehicle information system.First, the principle of FlexRay was analyzed and the bus parameters in an XML file were described with their storability and configurability.The bus information was associated with corresponding IDs after the parsing.Every software component can get the desired information through the IDs.Finally,the method was proved to be feasible and effective by simulation of vehicle meters in the laboratory.
Keywords:vehicle information system  FlexRay  XML file  bus parsing
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号