首页 | 本学科首页   官方微博 | 高级检索  
     

补强树脂PFM-C在轿车子午线轮胎下三角胶中的应用
引用本文:李贞延,张俊伟,李冬,王廷华,刘晓庆,熊国华.补强树脂PFM-C在轿车子午线轮胎下三角胶中的应用[J].轮胎工业,2014,34(11):684-687.
作者姓名:李贞延  张俊伟  李冬  王廷华  刘晓庆  熊国华
作者单位:四川海大橡胶集团有限公司,四川简阳,641402
基金项目:致谢:本工作得到了炼胶事业部张永科总工程师及实验检测中心人员的大力支持,在此表示感谢!
摘    要:研究补强树脂PFM-C在轿车子午线轮胎下三角胶中的应用.结果表明:在下三角胶中加入补强树脂PFM-C并适当调整炭黑及硫化体系用量,胶料的门尼粘度降低,门尼焦烧时间缩短,硫化速度加快,炭黑分散性提高,工艺性能良好;硫化胶的硬度、拉伸强度和拉断伸长率增大;成品轮胎的高速和耐久性能达到国家标准要求.

关 键 词:补强树脂  轿车子午线轮胎  下三角胶

Application of Reinforcing Resin PFM-C in Apex Compound of Passenger Car Radial Tire
LI Zhenyan,ZHANG Junwei,LI Dong,WANG Tinghu,LIU Xiaoqing and XIONG Guohua.Application of Reinforcing Resin PFM-C in Apex Compound of Passenger Car Radial Tire[J].Tire Industry,2014,34(11):684-687.
Authors:LI Zhenyan  ZHANG Junwei  LI Dong  WANG Tinghu  LIU Xiaoqing and XIONG Guohua
Affiliation:(Sichuan Haida Rubber Group Co. ,Ltd,Jianyang 641402,China)
Abstract:The application of reinforcing resin PFM C in the apex compound of passenger car radial tire was investigated. The results showed that,by using reinforcing resin PFM-C and properly adjusting the addition levels of carbon black and curing additives in the compound,the Mooney viscosity of the compound decreased,the Mooney scorch time was shortened, the curing rate increased, the dispersion of carbon black was improved and the processability of the compound was good. The hardness, tensile strength and elongation at break of the vulcanizate increased. The high speed performance and endurance of the finished tire met the requirements of national standards.
Keywords:reinforcing resin  passenger car radial tire  apex compound
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《轮胎工业》浏览原始摘要信息
点击此处可从《轮胎工业》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号