| 新型并联机床的刚度计算模型 |
| |
| 引用本文： | 李兵,王知行,胡颖.新型并联机床的刚度计算模型[J].机械设计,1999,3(3):14-16. |
| |
| 作者姓名： | 李兵 王知行 胡颖 |
| |
| 作者单位： | 哈尔滨工业大学,哈尔滨,150001 |
| |
| 基金项目： | 黑龙江省科委重大攻关项目 |
| |
| 摘 要： | 本文建立了并联机床的有限元刚度模型，通过实例计算得出机床的动平台中心距定台中心Ｚ坐标较小及动平台姿态角较小时可获得高刚度；根据实例计算结果和机床倒锥状的结构特点，提出了并联机床主刚度的概念，建立了主刚度简化模型，并以此作为衡量机床刚度的准则。
|
| 关 键 词： | 并联机床 主刚度 有限元 |
The stiffness calculation model of the new typed parallel machine tool |
| |
| Li,Bing.The stiffness calculation model of the new typed parallel machine tool[J].Journal of Machine Design,1999,3(3):14-16. |
| |
| Authors: | Li Bing |
| |
| Affiliation: | Harbin Institute of Technology |
| |
| Abstract: | This paper established the finite element stiffness model of parallel machine tools.By means of the calculation of living examples shows that it is obtainable to gain high stiffness while the distance between the centre point of moving platform and that of the fixed platform in the direction of Z coordinate is shorter and while the appearance angle of moving platform is smaller.According to the results of calculation of living examples and the structural characteristics of the reverse conical shaped machine tool the concept of main stiffness of parallel machine tools(MSPMT)is advanced and the simplified model of main stiffness is established and finally took the MSPMT as a criterion for the measurement of machine tool stiffness. |
| |
| Keywords: | Parallel machine tool Main stiffness Finite element |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
