Characterization of Photoluminescent (Y1–xEux)2O3 Thin Films Prepared by Metallorganic Chemical Vapor Deposition |
| |
Authors: | Joanna McKittrick Carlos F Bacalski G A Hirata Kevin M Hubbard S G Pattillo Kenneth V Salazar M Trkula |
| |
Affiliation: | Department of Mechanical and Aerospace Engineering and Materials Science Program, University of California at San Diego, La Jolla, California 92093-0411;Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 |
| |
Abstract: | The purpose of this study was to identify and correlate the microstructural and luminescence properties of europium-doped Y2O3 (Y1– x Eu x )2O3 thin films deposited by metallorganic chemical vapor deposition (MOCVD), as a function of deposition time and temperature. The influence of deposition parameters on the crystallite size and microstructural morphology were examined, as well as the influence of these parameters on the photoluminescence emission spectra. (Y1– x Eu x )2O3 thin films were deposited onto (111) silicon and (001) sapphire substrates by MOCVD. The films were grown by reacting yttrium and europium tris(2,2,6,6-tetramethyl–3,5-heptanedionate) precursors with an oxygen atmosphere at low pressures (5 torr (1.7 × 103 Pa)) and low substrate temperatures (500°–700°C). The films deposited at 500°C were smooth and composed of nanocrystalline regions of cubic Y2O3, grown in a textured 100] or 110] orientation to the substrate surface. Films deposited at 600°C developed, with increasing deposition time, from a flat, nanocrystalline morphology into a platelike growth morphology with 111] orientation. Monoclinic (Y1– x Eu x )2O3 was observed in the photoluminescence emission spectra for all deposition temperatures. The increase in photoluminescence emission intensity with increasing postdeposition annealing temperature was attributed to the surface/grain boundary area-reduction effect. |
| |
Keywords: | chemical vapor deposition luminescence europium |
|
|