| 低温截止阀设计 |
| |
| 引用本文： | 路兰卿. 低温截止阀设计[J]. 低温工程, 2005, 0(6): 56-59 |
| |
| 作者姓名： | 路兰卿 |
| |
| 作者单位： | 北京航天试验技术研究所,北京,100074 |
| |
| 摘 要： | 针对低温(液氢、液氧)截止阀设计时应该注意的阀门结构,绝热形式的选择,材料选用,密封,漏热,试验等一系列技术问题进行了说明,为初学阀门设计者提供一些参考.
|
| 关 键 词： | 截止阀 低温 漏热 密封 |
| 文章编号： | 1000-6516（2005）06-0056-04 |
| 收稿时间： | 2005-07-06 |
| 修稿时间： | 2005-07-062005-10-12 |
Design of cryogenic globe valve |
| |
| Lu Lanqing. Design of cryogenic globe valve[J]. Cryogenics, 2005, 0(6): 56-59 |
| |
| Authors: | Lu Lanqing |
| |
| Affiliation: | Beijing Institute of Aerospace Testing Technology, Beijing 100074, China |
| |
| Abstract: | The cryogenic equipment plays an important role in the testing system of the new type of the rocket engine. A series of technology problems, such as struction of valve, choice of insulation form, choice of material, sealing, leakage heat, testing, which should be noticed in design, are discussed and analyzed. All of these will be helpful for the new valve designers. |
| |
| Keywords: | globe valve low temperature leakage heat sealing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
